User manual WHIRLPOOL AFG 8180/IX PROGRAM CHART

[. . . ] 60301008GB. fm Page 1 Tuesday, June 21, 2005 4:01 PM PRODUCT SHEET 1. Area for drawers and pull-out baskets 4. [. . . ] Six horizontal lines appear on the digital display. After about 3 seconds, when the appliance is warm, (internal temperature above 10°C) only the two lines in the middle remain illuminated; The acoustic alarm and red led C are activated. The acoustic alarm stops while the red led continues to flash. When the temperature reaches -12°C, the red led automatically stops flashing. 2. Press button G to mute the acoustic alarm. Wait until the temperature indicated on the digital display reaches -12°C. Place food to be frozen and/or already frozen food in the freezer. 60301008GB. fm Page 2 Tuesday, June 21, 2005 4:01 PM PRODUCT SHEET Freezer compartment temperature adjustment The appliance is normally factory set for optimum operation at a temperature of -18°C. To alter the internal temperature between -16°C and -24°C, proceed as follows: • Press button E once to adjust the internal temperature: the digital display shows the temperature previously set. • Each time the button is pressed, the temperature setting is changed by 1°C: the value (between -16°C and -24°C) blinks cyclically on the display. • Approximately 5 seconds after the button has been pressed for the last time, the set temperature is stored, the display stops flashing and the current internal temperature is shown on the display. [. . . ] Follow the instructions given in the instructions booklet. An illuminated dot appears on the digital display. Follow the steps detailed in “Switching on the appliance”. 5019 603 01008 D GB F NL E P I GR S N DK FIN Printed in Italy 06/05 [. . . ]