User manual WHIRLPOOL AFO 397 INSTALLATION

[. . . ] Service & Installation manual Fully programmable combi steam oven & Fully programmable oven with boiler GB Table of Contents Preface and terms of warranty Approval plate Installation and connection -Installation -Water connection -Drain connection -Electrical connection/survey of supply lines Exhaust Checking before use Annual service check Start menu Main menu Set-up menu -Select language -Network -Setting sound -Setting time -Oven set-up Service menu -Select USB key service Restoring backup Selecting backup menu USB key service menu -Energy meters -Reading Meters Error log Error statistics 3-21 Service counters -Lime-scale diagnosis -Software updating menu -ClimaOptima calibration -Door sensor calibration -Technician service Test function Oven number Display oven set-up Edit oven set-up Logo Language update Enter codes Survey of error codes Appendices -Appendix 1: WHIRLPOOL installation checklist -Appendix 2: WHIRLPOOL instruction checklist -Appendix 3: Oven set-up (set-up menu) Page 3 4 5 6 7 8 9 10 11 12-13 14 15 16-22 17 18-19 20 21 22 23-60 24 25-27 26 28 29 30 31 32 33 34-35 36-39 40 41-42 43-62 44-50 51 52 53-59 60-61 62 63 64 65-66 67 68-69 -2- Preface and Terms of Warranty You are now the owner of one of the leading oven products on the market. All WHIRLPOOL products are currently subjected to intensive product development, which ensures that the products always contain the latest technology and the most up-to-date and energy-saving methods of preparation. Furthermore, the WHIRLPOOL products are entirely up-to-date with the latest developments/ technology in terms of • • • • ERGONOMICS AND SAFETY SIMPLE AND LOGICAL OPERATION USER FRIENDLY DESIGN RELIABILITY AND SERVICE To ensure that our customers get an optimum and reliable product, all WHIRLPOOL units are passed through an extensive test program in which all functions are subjected to a continuous and extreme load. For optimum results Before you start using the oven, we recommend that you study the user’s manual thoroughly in order to be able to fully utilise the many facilities and to ensure optimum cooking results. [. . . ] Empty steam generator and read sensor input. Fill steam generator until water level is high, and read sensor input. Set level to a value between high and low sensor input. Conclude by pressing OK. - 47 - Test Function, CombiWash Main switch Return to TEST FUNCTION Not active Activate pump for detergent INFO: Status for water pressure sensor (2 bar pressure sensitive switch) Activate pump for rinse aid Not active Activate solenoid valve for water Not active Not active Not active Not active Not active - 48 - Test Functions, Misc. Main switch Return to TEST FUNCTION Not active Activate external vent. 1 Terminal 4 INFO: Temperature core temperature probe 1 Not active Activate external vent. 2 Terminal 5 Not active Activate restart lamp INFO: Temperature Core temp. probe 2 Not active INFO: Restart status Not active INFO: Voltage at pressure sensor for ClimaOptima Not active INFO: Temperature at IO board and CPU Not active • • • • • • • Core 1: Shows current temperature of core temperature probe 1 (3 measuring points). Core 2: Shows current temperature of core temperature probe 2 (3 measuring points). When the external ventilation is activated, the oven control leaves the outlet active during program performance and 10 minutes after the program has ended. 1 and 2 are merely control voltage, they should be connected through an external relay (max. : 24V). Press sens shows voltage from pressure sensor (between 0 and 5 volts). CPU temp shows temperature of CPU board. - 49 - Test Function, Main Alarm Main switch Return to TEST FUNCTION Not active Activate main contactor Not active INFO: Shows status of thermo-switch circuit Not active Not active Not active Not active Not active Not active Not active - 50 - Oven Number Main switch Return to TECHNICIAN SERVICE Press OK to save oven number, and return to TECHNICIAN SERVICE Key in 0/A Key in 5/B Key in 1 Key in 6 Key in 2 Key in 7 Key in 3 Key in 8 Key in 4/CE Key in 9 • • • • • In this menu, you enter the serial number of the oven. The serial number consists of 9 figures. The serial number of the CombiPlus models includes the letters A or B (A = upper oven – B = lower oven). The serial number is printed on the approval plate. The serial number is used in the HACCP mode and in the menus Oven back-up and Restore from backup. The serial number can only be deleted if it holds 9 figures. Press 4/CE. - 51 - Display Oven Set-up Main switch Return to TECHNICIAN SERVICE Not active Not active Not active Not active Not active Not active Not active Not active Not active Not active Not active • This menu shows the features incorporated in this particular oven. Changes not possible. - 52 - Oven Set-up 1: Select Generation Main switch Not active Return to TECHNICIAN SERVICE Select VC1 for previous generation of Visual Cooking Select VC2 for the new generation of Visual Cooking Not active Not active Not active Not active Not active Not active Not active Not active • We recommend that you write down the settings of DISPLAY OVEN SET-UP before making any changes to the set-up. - 53 - Oven Set-up 2: Select Oven Model Main switch Press OK to confirm Return to OVEN SET-UP 1: SELECT GENERATION Not active Select ”BPE” Not active Select ”CPE” Not active Select ”KPE” Not active Not active Not active Not active • We recommend that you write down the settings of DISPLAY OVEN SET-UP before making any changes to the set-up. - 54 - Oven Set-up 3: Select Oven Size Main switch Press OK to confirm Return to OVEN SET-UP 2: SELECT OVEN MODEL Select oven size 1. 06 Select oven size 1. 20 Select oven size 1. 08 Select oven size 2. 10 Select oven size 1. 10 Select oven size 2. 14 Select oven size 1. 12 Select oven size 2. 20 Select oven size 1. 16 Not active • We recommend that you write down the settings of DISPLAY OVEN SET-UP before making any changes to the set-up. - 55 - Oven Set-up 4 Main switch Press OK Next menu Return to OVEN SET-UP 3: SELECT OVEN SIZE Not active Is this a PassThrough oven?YES / NO Not active Does oven have a restart button?NONE / DISPLAY / EXTERN / BOTH (PassTrough ovens only) Not active Restart time 1-10 min. Not active Does oven have core temp. YES / NO Not active Does oven have core temp. [. . . ] Delta-T und Cook & Hold anwählbar?Höchsttemperatur bei Vorheizen 300°C/572°F (250°C or 300°C). Mit CombiNet gibt es Zugang zum Programm-Editieren übers Web und offline über ein USBStick. Ist der Ofen mit ClimaOptima (automatischer Feuchtigkeitskontrolle) ausgerüstet? [. . . ]