User manual WHIRLPOOL AGB 456/WP INSTRUCTION FOR USE

[. . . ] THE APPLIANCE MUST BE INSTALLED BY QUALIFIED PERSONNEL. FRY-TOP Model Dim. : LxWxH (total h) of work surface 400 x 900 x 875 400 x 900 x 875 400 x 900 x 875 800 x 900 x 875 800 x 900 x 875 800 x 900 x 875 800 x 900 x 875 800 x 900 x 875 AGB 456/WP AGB 458/WP AGB 464/WP AGB 460/WP AGB 469/WP AGB 462/WP AGB 466/WP AGB 468/WP 400 x 900 x 270 400 x 900 x 270 400 x 900 x 270 800 x 900 x 270 800 x 900 x 270 800 x 900 x 270 800 x 900 x 270 800 x 900 x 270 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 230 V 3 / 400 V 3N 7. 2 kW 7. 2 kW 7. 2 kW 14. 4 kW 14. 4 kW 14. 4 kW 14. 4 kW 14. 4 kW 7. 2 kW 7. 2 kW 7. 2 kW 14. 4 kW 14. 4 kW 14. 4 kW 14. 4 kW 14. 4 kW 4 x 2. 5 mm2 / 5 x 2. 5 mm2 4 x 2. 5 mm2 / 5 x 2. 5 mm2 4 x 2. 5 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 2. 5 mm2 / 5 x 2. 5 mm2 4 x 2. 5 mm2 / 5 x 2. 5 mm2 4 x 2. 5 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 4 x 6 mm2 / 5 x 2. 5 mm2 Voltage rating Power Lead wire / Section 018- 03 - Electric fry-top 5 INSTALLATION INSTRUCTIONS Before beginning installation, remove all packaging from the appliance. Some parts are protected with an adhesive film which should be carefully removed. Any remnants of glue should be thoroughly cleaned using suitable substances such as benzine. [. . . ] Pass the wire through the core hitch and wire clamp, plug - Local accident prevention standards the leads into their terminals on the board and secure them. The earth lead must be a little longer than the others so that it is the last lead to disconnect if the wire clamp breaks. Unipotential The appliance must be connected up to a unipotential system. The connection screw is placed on the mains supply box. It is labelled. Warning! The manufacturers cannot be held responsible for any damage due to inadequate or incorrect installation. Under such circumstances the guarantee will be considered null and void. Start-up Before using the appliance for the first time, thoroughly clean the grilling plate (see “Cleaning and Taking Care of the Appliance”) to remove the protective film of mineral oil applied in the factory. Check installation and wiring, then turn the appliance on following the instructions below, and leave on, empty, for about 15 mins. 018- 03 - Electric fry-top 6 USING THE APPLIANCE Warning! - Beware of inexpert handling! What to do if something goes wrong If anything goes wrong, immediately turn the appliance off, then turn off the power supply at the switch located upstream of the appliance, and call the aftersales departIgnition Check that the fat tray is in place. Switch on: the green light will come on, indicating that the MAINTENANCE appliance is on. All maintenance should be carried out by qualified perTurn the thermostat from '0' on desidered temperature, sonnel only. Before carrying out any maintenance work, between 50°C and 300°C inclusive; the yellow light shows unplug the appliance or turn off the switch upstream of the that the resistances are on. As soon as the required temperature is reached, the yellow light will go off. Note: Turn off the appliance by turning the thermostat and on/off This is not indispensable for the chromium plate. knobs to the '0'. Nota: Appliances AGB 460/WP AGB 462/WP AGB 466/WP AGB 468/WP AGB 469/WP have 2 separate, independent cooking areas. THE 2002/96/EC DIRECTIVE (WEEE): information to users This informational note is meant only for owners of equipment marked with the symbol shown in Fig. A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number). Special precautions It is recommanded to keep cleaning the plate during use, using a scraper or a dampf cloth to remove particles of This symbol indicates that the product is classified, accorfood which could start smoking and causing unpleasant ding to the regulations in force, as an item of electrical and electronic equipment and conforms to EU Directive smells. 2002/96/EC (WEEE) meaning that, at the end of its service CLEANING AND TAKING CARE OF THE life, it must be treated separately from domestic waste, i. e. it must be handed in free of charge to a separate waste MACHINE electrical and electronic equipment collection centre or returned to the reseller when buying a new equivalent item Warning!Never clean the appliance with jets of water, whether of equipment. [. . . ] After cleaning the appliance, grease the plate with vegeta- ronmentally compatible recycling, treatment and disposal both directly and by joining a collective scheme. ble oil* What to do if not using the appliance for a long time Thoroughly clean and dry the machine as described. Grease the plate with vegetable oil*. . 018- 03 - Electric fry-top 7 Wiring diagrams R1 1 2 3 4 5 6 AGB 456/WP - AGB 458/WP AGB 464/WP H2 H1 32 22 12 F2 31 21 11 1 B2 P1P2 P3 P4 12 22 32 2 3 4 11 21 31 F1 R1 1 2 3 4 5 6 mA 1 2 L1 L 2 L 3 PN 3 4 5 6 12 22 32 230V 3 mA 1 2 3 4 5 PN 6 400 V 3N L1 L 2 L 3 N AGB 460/WP - AGB 462/WP AGB 466/WP - AGB 469/WP AGB 468/WP R1 R1 1 2 3 4 5 6 1 2 3 4 5 6 H2 H1 32 22 12 F2 31 21 11 1 B2 P1P2 P3 P4 12 22 32 2 3 4 11 21 31 F1 H2 H1 32 22 12 F2 31 21 11 1 B2 P1P2 P3 P4 12 22 32 2 3 4 11 21 31 F1 mA 1 2 3 4 5 6 400 V 3N L1 L 2 L 3 N PN mA B1 F1 H1 H2 R1 F2 Line input terminal board Switch Thermostat Green pilot lamp Orange pilot lamp Resistance Safety thermostat 018- 03 - Electric fry-top 8 WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. [. . . ]