User manual WHIRLPOOL AGB 653/DP INSTRUCTION FOR USE

[. . . ] The wood and cardboard components can be disposed of by respecting the norms in vigor. When disposing of the product, do not abandon it in the environment; its disposal must respect the norms in vigor. All of the metallic parts are in stainless steel and are detachable. The plastic parts are marked with the symbol of the relative material. [. . . ] If the detergent metering unit did not come pre-installed, it can be installed at a later time by ordering the relative KIT. Alternatively, an external metering unit can be connected by means of an electrical connection with a 2x0. This cable must be inserted through the passage indicated in the TECHNICAL CHARACTERISTICS scheme and connected in accordance with the electrical scheme furnished with the dishwasher. The metering unit must be 230V/50Hz with a maximum absorbed power of 15W. Connect the external detergent metering unit to the dishwasher through the red tube cited above. 6 6 MECHANICAL MODEL USER INSTRUCTIONS AGB 648/WP- AGB 650/DP- AGB 650/WP- AGB 654/DP- AGB 654/WP- AGB 656/WP- AGB 657/WP- AGS 653/WP- AGB 661/DP- AGB 661/WP- AGB 663/WP AGB 649/WP- AGB 651/DP- AGB 651/WP- AGB 655/DP- AGB 658/WP- AGS 654/WP- AGB 662/DPAGB 662/WP AGB 653/DP- AGB 653/WP AGB 652/DP- AGB 652/WP ADN408 ADN409 7 on/off button symbol Wash cycle button symbol Regeneration button symbol Short wash cycle symbol Led indicator light functions Drain pump button symbol Boiler rinse led indicator light symbol Medium wash cycle symbol 6. 1 Before washing Use only detergents and rinse-aids for industrial dishwashers. Do not use detergents intended for hand washing. It is recommended to use products which were designed especially for this dishwasher. During the loading of the tanks, be careful not to switch products as this could provoke dishwasher malfunction and damage. Do not mix different detergents together as this could damage the metering unit. Detergents for industrial dishwashers can cause serious irritations. Take care to respect the instructions provided by the detergent manufacturer on the packaging. Turn off the main switch (usage), “OFF” appears on the display. The correct positioning of the filters, the rotation of the sprinklers, the absence of foreign objects within the dishwasher. ); before washing, let dishes with residues of dried-on cheese, egg…… etc. It is preferable to arrange large amounts of silverware with the handles facing down, taking care to avoid injury from fork prongs and knife blades. 2 First daily use (tank and boiler empty) What to do and what happens The panel shown in the manual and in the graphics may contain functions which are not 8 present on your machine. Activate the wall switch, open the door, insert the overflow and close the door: Press the on/off button. The boiler and tank water-loading led indicator light turns on. Once the boiler and tank have been loaded, the boiler led indicator light turns on. Insert the rack Select the desired program by pressing: short cycle or medium cycle Wait for the boiler led indicator light To start the wash cycle, press the to turn off cycle button Once the cycle has started, the wash cycle led indicator light turns on. [. . . ] Wait for the boiler led indicator light to turn on. Verify the temperature shown on the display, if below 50°C call Assistance. Increase the duration of the wash cycle, particularly if dishes are very dirty or contain partially dried residues. The Verify the cleanliness of the nozzles and the correct function of any installed water softeners. [. . . ]