User manual WHIRLPOOL AGB 668/WP INSTRUCTION FOR USE

[. . . ] The wood and cardboard components can be disposed of by respecting the norms in vigor. When disposing of the product, do not abandon it in the environment; its disposal must respect the norms in vigor. All of the metallic parts are in stainless steel and are detachable. The plastic parts are marked with the symbol of the relative material. [. . . ] If the detergent metering unit did not come pre-installed, it can be installed at a later time by ordering the relative KIT. Alternatively, an external metering unit can be connected by means of an electrical connection with a 2x0. This cable must be inserted through the passage indicated in the TECHNICAL CHARACTERISTICS scheme and connected in accordance with the electrical scheme furnished with the dishwasher. The metering unit must be 230V/50Hz with a maximum absorbed power of 15W. Connect the external detergent metering unit to the dishwasher through the red tube cited above. 6 6 USER INSTRUCTIONS AGB668 – AGB671 AGB672 – AGB667 on/off switch Wash cycle lamp indicator Boiler lamp indicator Tank temperature symbol Boiler temperature symbol Cycle selector 6. 1 Before washing Use only detergents and rinse-aids for industrial dishwashers. Do not use detergents intended for hand washing. It is recommended to use products which were designed especially for this dishwasher. During the loading of the tanks, be careful not to switch products as this could provoke dishwasher malfunction and damage. Do not mix different detergents together as this could damage the metering unit. Detergents for industrial dishwashers can cause serious irritations. Take care to respect the instructions provided by the detergent manufacturer on the packaging. Turn off the main switch (usage), “OFF” appears on the display. The correct positioning of the filters, the rotation of the sprinklers, the absence of foreign objects within the dishwasher. 2 Program selection LOAD TYPOLOGY Glasses, cups Silverware and dirty plates DURATION (*) Brief about 60 seconds Medium about 120 seconds PROGRAM (*) The duration of the cycles indicated above refers to a tri-phase connection, with a 50°C hot water supply. If a cold water supply is being utilized, the cycle duration could increase in relation to the input water temperature. 3 Loading the dishes Plates The rack can hold 12 bowls or 18 plates. remove solid residues from the plates (bones , peels , cores , etc. ); let plates, with dried residues of cheese, egg, etc. Glasses Position the glasses upside down. It is preferable to arrange large amounts of silverware with the handles facing down, taking care to avoid injury from fork prongs and knife blades. [. . . ] Wait for the boiler led indicator light to turn on. Verify the temperature shown on the display, if below 50°C call Assistance. Increase the duration of the wash cycle, particularly if dishes are very dirty or contain partially dried residues. The Verify the cleanliness of the nozzles and the correct function of any installed water softeners. [. . . ]