User manual WHIRLPOOL AKM 126/NB/01 PROGRAM CHART

[. . . ] 5. Product description sheet SE NO DK FI Dual ring cooking zone (Lightronic Sense) Ø 210x120, 2100 W (inner 750 W, outer 1350 W) Cooking zone (Lightronic Sense) Ø 145x250, 1800 W (inner 1000 W, outer 800 W) Halogen heating zone (Lightronic Sense) Ø 145, 1200 W Halogen heating zone (Lightronic Sense) Ø 180, 1800 W Display Innovative features of the hob The DISPLAY shows at a glance the chosen power setting and, if applicable, the chosen function. [. . . ] Any aesthetic defects (scratches, marks etc. ) must be reported at the time of installation. Dimensions of cooking hob and worktop Ideal Max. 50% No detection No detection The ELECTRONIC CONTROL keeps variations in heating zone temperature to a minimum thus ensuring uniform cooking at all times. The BOIL DRY FUNCTION detects abnormal situations such as when the pan has boiled dry and turns the respective heating zone off automatically. The DIAGNOSTIC SYSTEM continually checks that the hob is working properly and indicates if there is a fault. Display description Dual ring function Pan detection turned off Turbo heat Auto fast boil Gentle heat Alphanumeric DISPLAY Keep hot function The displays on the hob correspond to the chosen control knob settings and selections, which are listed in the hob’s instruction booklet and depend on the features included in the particular version of the hob. 5019 419 61121/C Possible user messages Flashing indicator lamp: Special feature selected. Indicator lamp on continuously: Special feature active. Using the hob • • • Turn the knob (for the cooking zone to be used) clockwise to the desired power level or to the symbol corresponding to the function required. To turn the cooking zone off, turn the knob until the mark is at position “0”. Turbo heat) are explained in the separate product description for the hob. Whilst using the hob and/or the oven the cooling fan works continuously, adjusting its ventilation capacity according to the heat setting selected. “U that moves up and down”: When pan detection is active this display indicates either that there is no cooking utensil placed on the heating zone or the utensil is not positioned properly. [. . . ] 1. Please note: The turning off or turning back on again, where necessary, has to be carried out for each separate heating zone. Turbo heat: The booster function is turned on for fast boiling . Hob still hot warning: The hot hob warning (“H”) stays on after the heating zone has been turned off until the temperature has fallen to a safe level. If any display readout shows an “F” message, please get in touch with after-sales service. [. . . ]