User manual WHIRLPOOL AKP 402/IX PROGRAM CHART

[. . . ] • If necessary, switch the positions of the dishes to cook food more evenly. • It is not necessary to preheat the oven (except for pizzas and focaccias). • • • • • • • • To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread. [. . . ] Set the function and the temperature (see chapter: “Selecting the cooking function”) up to point 2 without confirming by pressing “ok”. Press “set” (the indicator on the display lights up next to the cooking time symbol ) and, within 8 minutes, proceed to select the desired cooking time using buttons “-” or “+”. Confirm the selection by pressing “ok”; the oven switches on and the display shows the residual cooking time. To change the previous temperature setting, turn knob 5. To return to the residual cooking time, wait 5 seconds. Displays ᕃ ᕄ ᕅ ᕆ ᕇ Function selector knob Setting button: (“set”) Confirmation button (“ok”) Buttons for changing time (“-” “+”) Thermostat knob Temperature indicator Cooking time End of cooking time Appearance of on the display: Once the set time has elapsed, an acoustic signal is heard and appears on the display. To change the cooking time, use button “-” or “+”. Return to point 3 chapter “Selecting the cooking time”. Turn knob ᕃ to “0” The time of day appears again on the display. To increase the cooking time, use button “-” or “+”. Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Proceed as described in points 1 and 2 chapter “Selecting the cooking time” 2. Press “set” to set the end of cooking time: the indicator next to the symbol lights up. Set the end of cooking time using button “-” or “+”. Press “ok” to confirm the end of cooking time. The oven will turn on automatically at the end of cooking time minus cooking time: the indicators on the display above the symbols will light up. When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “12:00”. Selecting and changing the clock time: 1. Press button “-” or “+” to set the hour. [. . . ] Press “ok” to confirm the selection. Once the set time has elapsed: An acoustic signal sounds and flashes on the display. Press “ok”: The acoustic signal stops. [. . . ]