User manual WHIRLPOOL AKP 638 WH PROGRAM CHART

[. . . ] AKP 638 ES PT PRODUCT DESCRIPTION SHEET OVEN First. . . Last: Runner positions 1. Control panel Upper heating element Grill element Oven light Fan Lower heating element (not visible) Oven door hinges Oven door Last First Accessories: • Grid • Drip tray • Baking tray CONTROL PANEL 1. [. . . ] - Turn over the meat about half-way through cooking time. STATIC FUNCTION Use when all the food is on the same runner level. - Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red thermostat indicator light switches off. - Ideally, the shelf should be on the second runner level when using the static function. GRILL + FAN FUNCTION Ideal for large joints, pork, chicken and roast beef. - The oven door must be closed during the cooking cycle. - Place the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to reduce smoke and fat spatters. - Turn over the meat about half-way through cooking time. STATIC FUNCTION + FAN Use this function when cooking on two different levels. - Oven pre-heating is not necessary (except for pizzas and focaccia). - Switch the position of the dishes in the oven 10 minutes before the end of cooking time. - Remove the cooked dish and, if necessary, continue cooking the other one for as long as required. DEFROST FUNCTION Ideal for thawing frozen food to room temperature. - The food should be inserted in the oven in its wrapping to prevent it from drying out. GRILL FUNCTION Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts. SWITCHING THE OVEN ON Turn the selector knob to the required symbol. • Turn the thermostat knob clockwise to the required temperature. [. . . ] - To use the oven without programming the cooking time, set the knob to . Warning: If the programmer is on “0” the oven will not switch on: to switch on the oven, either set the programmer knob to or set the required cooking time. 5019 310 54881 GB [. . . ]