User manual WHIRLPOOL AKP 640 WH PROGRAM CHART

[. . . ] Insert the spit in the hole provided on the rear wall, laying it on the support grid. We suggest you poured some water in the drip tray to reduce smokes and grease spatters. Close the oven door. STATIC FUNCTION Use when all the food is on the same runner level. [. . . ] - Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to reduce smoke and fat spatters. - Turn over the meat about half-way through cooking time. DEFROST FUNCTION Ideal for thawing frozen food to room temperature. - The food should be inserted in the oven in its wrapping to prevent it from drying out. 1. 4. Programmer Thermostat control knob Functions selector knob Thermostat red indicator light Important: An optional kit consisting of an oven door glass and of relevant mounting components, is available by the After-Sales Service. The use of the kit reduces the temperature of the outer oven surface and is strongly recommended if there are kids in the house. Code N°: 4819 310 39186. SWITCHING THE OVEN ON Turn the selector knob to the required symbol. • Turn the thermostat knob clockwise to the required temperature. The red thermostat indicator light switches on. • When the required temperature is reached, the red thermostat indicator light switches off. End of the cooking cycle: • Return the knobs to the OFF position (0-•). 5019 310 53221 USING THE PROGRAMMER Important: the programmer symbols are given as an indication only; for correct operation of the programmer, follow the instructions and illustrations given on these pages. USING THE PROGRAMMER PROGRAMMING DURATION AND END OF COOKING TIME USING THE MINUTE MINDER WITH ACOUSTIC SIGNAL CONTROL BUTTONS AND SYMBOLS 1. Button used to select minute minder with acoustic signal 2. Button used to set the cooking duration 3. Button used to set the end-of-cooking time 4. Button used to select manual operation 5. Button used to set or change data AUTO: when permanently alight, indicates operation of the oven in automatic mode. AUTO: will also blink to confirm end-of-cooking, prompt further programming or indicate a wrong selection. indicates that the oven is in operation and enabled in manual mode. [. . . ] Set the oven control knobs to the temperature and functions required. Once the cooking time has elapsed, an acoustic signal indicates that the oven has switched off. • When the appliance is installed new, or following a power failure, digits 0:00 and the AUTO symbol will blink in the display. Press and hold buttons 2 and 3 simultaneously, and set the clock using buttons 5 and 6. To operate the oven manually, press button 4: the will be displayed. symbol Return the oven control knob to position “0”, then press button 4 to silence the acoustic signal. [. . . ]