User manual WHIRLPOOL AKP 801/01/IX INSTRUCTION FOR USE

[. . . ] AKP 161 - AKZ 162 - AKZ 517 AKP 801 - AKP 803 Users Guide & Installation Handbook contents & INTRODUCTION CONTENTS • • • • • • SAFETY USING THE product cleaning INSTALLATION INSTRUCTIONS technical data CUSTOMER CARE INTRODUCTION Thank you for buying this Britishbuilt appliance from us. This guide book is designed to help you through each step of owning your new cooker, from installation to use. Please read it carefully before you start using your product, as we have endeavored to answer as many questions as possible, and provide you with as much support as we can. Safety Before Using the product Make sure that you have removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. [. . . ] However, once the program is set then it cannot be adjusted. Extra time cannot be added, nor can the end time be extended. To cancel the semi automatic programs, press both the Up and Down buttons together. This can be done at any time during the cooking process. For the instructions on how to use both of these functions, please see the following page. Fully automatic cooking This function incorporates both a duration and an end time and is meant to be used when you wish to delay the start time. We recommend that the first few times this function is used you are in the house, this will familiarise you with your oven and prevents food from being over cooked or under cooked. Care must be taken when selecting foods for this function, it is not recommended for certain food items which may spoil, or are sensitive to being left. It is also advisable to set the end time to be as close to your return as possible to prevent food being left standing. Using the CLOCK/programmer-elec(if fitted) Semi-automatic cooking The duration method • Press the Function button twice, (1) which will skip past the Minute Minder. The LED display will flash the word ‘dur’, (2) and the ‘A’ will flash on the left hand side of the display. Use the Up and Down buttons to set the length of time you want to cook for. (3) This must be done within 5 seconds or the time of day will show again. • • Once this is done the oven will automatically switch off once the time has elapsed, and the alarm will sound. To switch off the alarm, press any button. To view any remaining time press the function button twice. The end time method • Press the Function button three times, which will skip past the Minute Minder and the Duration programmer. (4) The LED display will flash the word ‘End’ and the ‘A’ will flash on the left hand side of the display. (5) Use the Up and Down buttons to select the time the oven is required to turn off. (6) • • Once this is done the oven will turn itself off at the time you have selected. To switch off the alarm, press any button. Using the CLOCK/programmer-elec(if fitted) Fully automatic cooking (example) This programming method is best suited for when a delayed start time is required. Unlike the semi automatic methods this requires both the duration and the end time to be entered. The timer will work out the start time and begin cooking. • Press the function button twice to select the length of time your food will need. (7) The ‘A’ on the left hand side will flash and the ‘dur’ message will flash up. [. . . ] Don’t leave food in the oven to cool down. Automatic cooking will normally pro- • • • • • customer care AFTER-SALES SERVICE Before calling the After-Sales Service: 1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide”. Switch the appliance off and back on again it to see if the fault persist. [. . . ]