User manual WHIRLPOOL AKR 506 IX INSTRUCTION FOR USE

[. . . ] IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the attention symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the attention symbol and the following terms: DANGER: WARNING: indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. [. . . ] € Turn off the appliance and restart it to see if the fault persists. The hood's suction level is not sufficient: • Check the suction speed and adjust as necessary: • Check that the filters are clean: • Check the air vents for any obstructions. The light does not work; • Check the light bulb and replace if necessary; • Check that the light bulb has been correctly fitted. aFTER-SALES SERVICE Before calling the After-Sales Service: 1. See if you can solve the problem yourself with the help of the suggestions given in the "Troubleshooting guide". Switch the appliance off and back on again it to see if the fault persists. If after the above checks the fault still occurs, get in touch with the nearest After-sales Service. Always specify: • a brief description of the fault; • the exact type and model of the appliance; • the service number (number after the word Service on the rating plate), located on the inside of the appliance. The service number is also indicated on the guarantee booklet; • your full address; • your telephone number. If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used and repairs carried out correctly). cLEANING WARNING - Never use steam cleaning equipment. - Disconnect the appliance from the power supply. iMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth. € Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. iMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin the enamel surface. € Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT: In order to avoid product damages, do not spray cleaners directly to the control while cleaning the Hood. IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals. gB10 MAINTENANCE IMPORTANT: - use protective gloves. [. . . ] In extractor mode only, with UPPER AIR OUTLET: Connect the fume exhaust pipe to the collar. In extractor mode only, with UPPER AIR OUTLET: Remove the pre-cut part from the top cover. Fit the top cover, fixing it with the previously removed 4 screws. Note: Insert the power cable in the special spaces. [. . . ]