User manual WHIRLPOOL AKR 672 IX PROGRAM CHART

[. . . ] Mark a centre-line on the wall from the cooktop to the ceiling. Bearing in mind the minimum heights over the cooktop specified above, mark the height of the hood on the wall with a pencil and place the template against the wall on the mark. Using the template supplied, mark the holes, drill them and insert the rawlplugs, partly tighten 1 screw in the top rawlplug. Fix the flue support to the wall as close as possible to the ceiling. [. . . ] Remove the clip that secures the lamp cover, then prise off using a small screwdriver or other suitable tool. Refit the lamp cover and secure in place with the clip. Note: the lamp can also be accessed by removing the grease filters, but removing the lamp in this way is more difficult. b 5019 318 33250 PL CZ SK H RUS BG RO GB SAFEGUARDING THE ENVIRONMENT 1. Packing Packaging materials are 100% recyclable and are marked with the recycling symbol . Dispose of the appliance in conformity with local environmental regulations. Packaging materials (plastic bags, polystyrene, etc. ) can be dangerous for children and should be kept well out of their reach. Product This appliance is marked according to the European directive 2002/ 96/EC, Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is scrapped suitably, you can help prevent potentially damaging consequences for the environment and health. The symbol on the product or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to a suitable collection centre for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For further information on the treatment, recovery and recycling of this product, contact the competent local office, the household waste collection service or the shop where you purchased the appliance. Electrical connections The mains power supply must match the voltage given on the dataplate located inside the hood. If provided with a plug, connect the hood to a power socket complying with current regulations and located in an accessible area. If it does not have a plug (direct connection to the power supply) or if the socket is not in an accessible place, fit a suitable double-pole switch that ensures complete disconnection from the power supply in category III overvoltage conditions, complying with the installation rules. IMPORTANT: Before reconnecting the hood circuit to the mains power supply and checking correct operation, make sure the power cable is correctly fitted and that it was NOT crushed in the housing during installation. Cleaning the hood Warning!Failure to remove oil/grease (at least once a month) could result in fire. Use a soft cloth with a neutral detergent. Never use abrasive substances or alcohol. Before using the hood To ensure best use of your hood, please read these instructions carefully and keep them for future reference. Packaging materials (plastic bags, polystyrene, etc. ) can be dangerous for children and should be kept well out of their reach. Make sure the hood was not damaged during transport. Declaration of conformity PRECAUTIONS AND GENERAL RECOMMENDATIONS IMPORTANT! • The appliance is not intended for use by young children or persons with restricted physical, sensory or mental abilities or without experience and knowledge of the appliance, unless they are under the supervision or instruction of a person responsible for their safety. • Children must be supervised to ensure that they do not play with the appliance. Do not connect the appliance to the mains power supply until installation has been completed. Always disconnect the hood before cleaning or carrying out maintenance by unplugging it or switching off the power supply. [. . . ] • Do the filters need cleaning or changing?The light does not work: • Does the lamp need replacing?• Is the lamp correctly fitted? AFTER-SALES SERVICE Before calling the After-Sales Service 1. Check to see if you can solve the problem yourself (see “Troubleshooting guide”). [. . . ]