User manual WHIRLPOOL AKS 332/NE PROGRAM CHART

[. . . ] AKS 332 GB 2 3 PRODUCT DESCRIPTION SHEET 1. Radiant cooking zone Ø 180 Radiant cooking zone Ø 210 Radiant cooking zone Ø 145 Radiant cooking zone Ø 145 Display Be careful: To avoid permanently damaging the glass-ceramic top, do not use: - Pots with bottoms that are not perfectly flat. [. . . ] Press one of the buttons “B” corresponding to the cooking zone you intend to use. Select the heat setting required with buttons “E” or “C”. The other selectable cooking settings go from 1 to 9. Press buttons +/- at the same time to cancel all settings. Pressing button “+” when level 9 is reached, the “Booster” function is activated and the letter “A” appears on the display. IMPORTANT: the control is deactivated 10 seconds after the heat setting has been selected. To change the heat setting, first press the selection button “B” again, then proceed to change the setting, using buttons “E” or “C”. To set the Timer function, select the desired cooking zone and power setting then press the cooking zone key again and a luminous dot will appear on the display of the timer-controlled cooking zone. The indication “00” blinks on the 2 displays. Press buttons “C” or “E” to set the time from 1 to 99. [. . . ] The function remains on even after the hob is switched off and on again and can be deactivated by pressing button “D” again until the dot above the function button goes off. H RESIDUAL HEAT INDICATOR When the cooking zone is switched off, the residual heat indicator “H” remains on or flashes alternating with “0” until the temperature of the hob returns within safety levels. IMPORTANT: The hob’s safety features include an automatic switching off function. Prolonged use of the same heat setting triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting, the cooking zone switches off). [. . . ]