User manual WHIRLPOOL AKT 842/BA PROGRAM CHART

[. . . ] AKT 842 PRODUCT DESCRIPTION SHEET 1. Induction cooking zone Ø 210 Radiant cooking zone Ø 145 Radiant double cooking zone Ø180 Induction double cooking zone Ø 145 Display DE GB FR NL ES PT GR IT SE NO DK FI PL CZ SK HU RU 2 3 1 4 Important: To avoid permanently damaging the glass ceramic hob, do not use: - pots with bottoms that are not perfectly flat, - metal pots with enamelled bottom. Any aesthetic defects (scratches, marks etc. ) must be reported at the time of installation. 5 HOB DIMENSIONS (mm) TYPE: PLEAM 230 V~/400 V 3N ~ 50 Hz 6. 6 kW TYPE: PLEAM 230 V~ 50 Hz 6. 6 kW (for UK only) 5019 319 01143 HOW TO USE YOUR HOB D A F E C A B C D B On/Off C B C B E F G C Child safety device B G C B Heat setting increase Heat setting decrease Fast boil Timer Activates/deactivates the dual cooking zone CAUTION: Before switching on the hob, deactivate the CHILD SAFETY DEVICE by pressing button “E”. To switch the hob on, keep button “A” pressed for approx. [. . . ] The CHILD SAFETY function is switched on by holding down button “E” until a dot lights up above the function button. This function locks all the buttons except the hob switching off button “A”. This function remains on even after the hob has been switched off and on again. It can be cancelled by holding down button “E” until the dot above the function button switches off. The TIMER function (if available) can be used as a minute minder and also for programming the operation of the required cooking zones. To activate the function, press the button with the clock symbol “F”. To programme the timer for a given cooking zone, first select the desired cooking zone using one of the buttons “B”. An indicator dot lights up next to the cooking zone selected. Within 10 seconds, set the cooking time using buttons “F” +/- (1-99 min). The Timer function begins automatically and the red indicator dot remains lit. At the end of the set cooking time, an acoustic signal sounds. If a cooking zone has been programmed to operate with the timer, it is switched off and the red indicator dot switches off too. The timer function can only be used to activate one cooking zone. To use the “minute minder” function, press the button with the clock symbol “F”, set the power of the cooking zone to 0 (zero) and then press buttons “F” +/- to set the desired time. [. . . ] After the cooking zone is switched off, the residual heat indicator “H” remains on or flashes, alternating with “0” until the hob temperature falls to an acceptable safety level. Important: The hob's safety features include an automatic switching off function. Prolonged use of the same heat setting causes switching off of the cooking zone (e. g. 1 hour at maximum heat setting, the cooking zone switches off). [. . . ]