User manual WHIRLPOOL AKZ 205/WH PROGRAM CHART

[. . . ] • Ideal for thawing frozen food at room temperature. • The food should be placed in the oven in its wrapping to prevent it from drying out. Description of function Highest level First level STATIC PASTRY/FAN ACCESSORIES GRILL Aluminium baking tray: Wire Shelf: CONTROL PANEL TURBOGRILL DEFROST SWITCHING ON THE OVEN 1 2 3 4 5 6 7 8 1. Control knob for front left hotplate 0 1 . . . 10 *. Control knob for rear left hotplate 0 1 . . . 10 * 3. [. . . ] These functions extend the heating area of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles. To switch on the double zone (if available), turn the knob to and wait until the residual heat indicator for the hotplate begins to flash. To switch on the triple zone function (if available), wait until the LED begins flashing quickly. Select the power setting required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. To deselect, turn the knob to “0”. GENTLE HEAT HEAT MAINTENANCE FAST BOIL N. B. : Cooking times and temperatures are approximate only. MULTI ZONE HOW TO OPERATE THE COOKTOP The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols. • Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with the cooktop). The yellow led lights up, indicating operation. GB GUIDE TO USING THE ELECTRONIC PROGRAMMER Display Heat Maintenance Extra browning Electronic programmer Temperature increase indicators Selecting the cooking time: Select the cooking time (available with any function) to turn the oven on for a specified period of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking time is 3 hours and 59 minutes. To return to the display of the remaining time, wait 20 seconds or press the button ᕄ. To use the special functions Extra browning “Special functions”. and Heat Maintenance , consult the chapter To change the pre-set temperature or grill level: Turn the knob ᕅ and confirm by pressing the button ᕄ or wait about 10 seconds for automatic acceptance of the setting. Appearance of on the display: When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay on for 25 min. Press button ᕄ to stop the acoustic signal. The time of day appears again on the display. Press button ᕄ again for 5 seconds to reactivate. For safety reasons, the oven switches off automatically (except for the Setting end of cooking time By using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Set the function and temperature or grill level. See chapter: “Fast starting the oven”, paragraph: “Select cooking function”. [. . . ] Set the cooking time or end of cooking time. See chapter: “Fast starting the oven” and “Selecting the cooking function” blinks on the display and “-- C” appears on the function: 4. Press button ᕄ or wait 20 seconds to get automatic confirmation of the setting. Minute minder ) The minute minder can only be used when the oven is not in use, and allows a maximum setting of 3 hours and 59 minutes. Press button ᕄ, the symbol blinks on the display. Special functions: (Extra browning Extra browning and Heat Maintenance These functions are only available with the selection of cooking time or end of cooking time. [. . . ]