User manual WHIRLPOOL AKZ 233/NB PROGRAM CHART

[. . . ] • To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread. • This function can be set to different power levels (min. • The oven door must be kept closed during the cooking cycle. • When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters. [. . . ] Set the function and temperature or grill level (see chapter: “Fast starting the oven” and “Selecting the cooking function”). Repeatedly press the button ᕄ, the indicator blinks on the display and “-0:00” appears. Operating the oven using the electronic programmer ᕃ ᕄ ᕅ 1 2 3 3. Turn knob ᕅ clockwise: the selected time blinks on the display. The appearance of the dash “-” indicates that the chosen time decreases until “0” is reached. Cooking time End of cooking time Clock ON/OFF - Function Selector Knob Button to select and confirm programmes Knob to change preprogrammed values (temperature, time, levels) Fast starting the oven 2. Selecting and changing the clock time: 1. Turn the knob ᕄ within 15 seconds to set the time of day. Press the button ᕄ or wait 15 seconds to get automatic confirmation of the setting. To modify the time of the day: Press the button ᕄ twice blinks on the display. Turn knob ᕃ to the chosen function: the preset temperature or grill level will flash on the display. If this value is right, press the button ᕄ to confirm or wait 10 seconds to have the setting accepted automatically. To change the pre-set temperature or grill level: 1. Turn knob ᕅ: the temperature (or grill level when knob ᕃ is on the selection ) blinks on the display. Press button ᕄ to confirm or else wait about 10 seconds to have the setting accepted automatically. The oven begins operation about 5 seconds after confirmation: the temperature increase indicators on the display turn on sequentially, indicating the temperature increase on the graduated scale °C . Notes: The set values can be changed even during cooking. At the end of cooking: Switch off the oven by turning knob ᕃ back to “0”. The time of day appears again on the display. Important notes: To cancel any selection made, turn knob ᕃ to “0”. Keeping button ᕄ down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons. “ ” and functions) after 4. 5 hours of continuous operation. When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “ ”. The oven automatically starts cooking 20 seconds after the setting and the time remaining until the end of cooking appears on the display. Note: To view or change the previously set temperature, turn the knob ᕅ by one click. [. . . ] To verify the chosen temperature or grill level, turn knob ᕅ by one click. To verify or change both the cooking time (e. g. 45 min. ) and the end of cooking time (e. g. 12:30), press the button ᕄ. Heat Maintenance This function is used to maintain an oven temperature of 60°C at the end of cooking with automatic oven operation. [. . . ]