User manual WHIRLPOOL AKZ 340/IX PROGRAM CHART

[. . . ] • When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters. • Ideally the meat should be turned during cooking. • • • • • To grill large joints of meat (roast beef and other roast meats). The function allows various settings (1 min - 5 max). [. . . ] Selecting and changing the clock time: 1. Press the button ᕄ three times. When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “ ”. Turn knob ᕃ to “0”. To modify the chosen temperature or grill level: Turn the knob ᕅ and confirm by pressing the button ᕄ or wait about 10 seconds for automatic acceptance of the setting. Appearance of on the display: When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay on for 25 min. Press button ᕄ to stop the acoustic signal. The time of day appears again on the display. 2. Turn the knob ᕄ within 15 seconds to set the time of day. Press the button ᕄ or wait 15 seconds to get automatic confirmation of the setting. To modify the time of the day: Press the button ᕄ twice Select cooking function: blinks on the display. If this value is right, press the button ᕄ to confirm or wait 10 seconds to have the setting accepted automatically. To change the pre-set temperature or grill level: ) blinks on 1. Turn knob ᕅ: the temperature (or grill level when knob ᕃ is on the selection the display. Press button ᕄ to confirm or else wait about 10 seconds to have the setting accepted automatically. The oven begins operation about 5 seconds after confirmation: the temperature increase indicators on the display turn on sequentially, indicating the temperature increase on the graduated scale °C. Note. : The set values can be changed even during cooking. At the end of cooking: Switch off the oven by turning knob ᕃ back to“0”. The time of day appears again on the display. Important notes: To cancel any selection, turn knob ᕃ to “0”. Keeping button ᕄ down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons. ” and functions) after 4. 5 hours of continuous operation. 1. Turn knob ᕃ to the chosen function: the preset temperature or grill level will flash on the display. Setting end of cooking time By using this function it is possible to preset the end of cooking time. [. . . ] When selecting the “Pyro-clean” function, the duration must be set first (see section titled “Selecting the duration of the pyro-clean function). Press the button ᕄ until the indicator blinks on the display. Turn knob ᕅ to set the time you want the pyro-clean to finish. The appearance of the dash “-” indicates that the chosen time decreases until “0” is reached. [. . . ]