User manual WHIRLPOOL AKZ 360/IX/01 PROGRAM CHART

[. . . ] This function can be set to different power levels (min. The oven door must be kept closed during the cooking cycle. When cooking meat, pour a little water into the drip tray (on the first level) to reduce smoke and fat spatters. Ideally the meat should be turned during cooking. [. . . ] and Heat Maintenance , consult the chapter “Special Cooking time End of cooking time Clock Fast starting the oven When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “ ”. The display shows 0:00 “--:--”. within 15 seconds to set the time of day. Selecting and changing the clock time: 1. Turn the knob To modify the chosen temperature or grill level: Turn the knob !and confirm by pressing the button acceptance of the setting. or wait about 10 seconds for automatic Appearance of on the display: When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay on for 25 min. The time of day appears again on the display. Press button to stop the acoustic signal. 3. Press the button or wait 15 seconds to get automatic confirmation of the setting. To modify the time of the day: Press the button twice blinks on the display. Turn knob  to the chosen function: the preset temperature or grill level will flash on the display. If this value is right, press the button to confirm or wait 10 seconds to have the setting accepted automatically. To change the pre-set temperature or grill level: ) blinks on 1. Turn knob !: the temperature (or grill level when knob  is on the selection the display. Press button to confirm or else wait about 10 seconds to have the setting accepted automatically. The oven begins operation about 5 seconds after confirmation: the temperature increase indicators on the display turn on sequentially, indicating the temperature increase on the graduated scale °C. Note. : The set values can be changed even during cooking. At the end of cooking: Switch off the oven by turning knob  back to“0”. The time of day appears again on the display. Setting end of cooking time By using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Set the function and temperature or grill level. [. . . ] Press the button until the indicator blinks on the display. to set the time you want the pyro-clean to finish. Press the button to confirm. Timer The minute minder can only be used when the oven is not in use, and allows a maximum setting of 3 hours and 59 minutes. Press button , the symbol blinks on the display. Selecting the end of pyro-clean time with delayed start 3. [. . . ]