User manual WHIRLPOOL AKZ 431 NB INSTRUCTION FOR USE

[. . . ] • Ideal for thawing frozen food at room temperature. • The food should be placed in the oven in its wrapping to prevent it from drying out. Top shelf Bottom shelf PASTRY/FAN GRILL ACCESSORIES Aluminium baking tray: Wire Shelf: TURBO GRILL CONTROL PANEL DEFROSTING HOW TO OPERATE THE OVEN • Turn the knob to the desired oven function. • Turn the thermostat knob clockwise to the required temperature. The red thermostat led lights up, switching off again when the oven reaches the selected temperature. [. . . ] Knob to switch on the right front cooking zone of the hob* 0 1 . . . 10 8. Hob operation yellow LED *) The hob knobs are not interchangeable. After any cleaning or Service operation, replace them in their original position. 5019 310 56690 FOOD Lamb/Veal/Beef/Pork Chicken/Rabbit/Duck Turkey/Goose Fish Stuffed peppers and tomatoes/roast potatoes Leavened cakes Filled pies Biscuits Lasagna Pizza/Bread Toast Cutlets/Sausages/Kebabs 1/2 chicken Whole chicken Roast beef Roasts Fish (whole) Function Level (from the bottom) 2 2 2 2 2 2 2 2 2 2 3/4 3/4 3 2/3 2 2/3 3 Temperature (°C) 200 190-200 200-210 190-200 190 180 180-190 180 190-200 225- 250 200-225 200-225 200-225 200-225 200-250 200-225 190-200 Cooking time min. Function 90-110 70-80 100-180 50-80 50-60 40-50 45-90 20-40 40-50 5-10 40-50 40-50 40-50 60-70 60-70 60-80 40-50 ICP (initial cooking function) Cooktop Functions Table (depending on model) Description of function HEAT To maintain a constant temperature of 60° until the end of cooking. To select this function, turn the knob MAINTENANCE to . This is available on the front left and rear left hotplates. This extends the heating area of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles. To select this function: turn the knob to and wait until the residual heat indicator for the hotplate begins to flash. Select the power setting required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. To deselect, turn the knob to “0”. Press “set” (the indicator on the display lights up next to the cooking time symbol ) and, within 8 minutes, proceed to select the desired cooking time using buttons “-” or “+”. Confirm the selection by pressing “ok”; the oven switches on and the display shows the residual cooking time. To change the previous temperature setting, turn knob #. To return to the residual cooking time, wait 5 seconds. Appearance of on the display: Once the set time has elapsed, an acoustic signal is heard and appears on the display. To change the cooking time, use button “-” or “+”. Return to point 3 chapter “Selecting the cooking time”. The time of day appears again on the display. To increase the cooking time, use button “-” or “+”. Display  !" # Function selector knob Setting button (“set”) Confirmation button (“ok”) Buttons for changing time (“-” “+”) Thermostat knob Temperature indicator Cooking time End of cooking time Starting the oven When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “12. 00”. Selecting and changing the clock time: 1. [. . . ] next to switches off when the selected temperature 3. Press “ok” to confirm; the oven will switch on. Turn knob# and select the desired temperature. Important notes: To cancel any selection, turn knob  to “0”. [. . . ]