User manual WHIRLPOOL AKZ 434/IX PROGRAM CHART

[. . . ] To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread. This function can be set to different power levels (min. The oven door must be kept closed during the cooking cycle. When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters. [. . . ] Values set can also be changed during cooking by turning knob 2. At the end of the cooking time, turn knob 1 to “O” to turn the oven off. The time will reappear on the display. Timer The timer can only be set when the oven is not in use and for a maximum setting of 3 hours and 59 minutes. Press the button until the indicator on the display blinks next to the symbol. Press the confirm button or wait 20 seconds for the setting to be accepted automatically; once the set time has elapsed, a buzzer will sound and “End” appears on the display. Press the button to stop the buzzer and the time will return to the display. Setting the clock Turn knob 1 to “O”. Press the button until the indicator blinks above the symbol . Turn knob 2 (within 10 seconds) to set the time of day; the time will blink on the display. Press the confirm button or wait 10 seconds to have the setting accepted automatically. To cancel any selection: turn knob 1 to “O”. To disable button tones press the button for 5 seconds. Repeat to restore button tones. GB IE Selecting the cooking time Selecting self-cleaning functions Self-cleaning functions (depending on model): “Pyro-clean” : this function has a pre-set duration of 3 hours and can be altered up to a minimum of 2 hours. “Express” : this function has a pre-set duration of 1 hour 15 minutes. “6th Sense” : this function calculates the duration in accordance with the level of grime. This function can only be selected when the oven is cold; if the oven is still hot, “Hot” will appear on the display. The display will only show “Sens” once the oven has cooled sufficiently. Turn knob 1 to the desired self-cleaning function (Pyro-clean, Express or 6th Sense) and press the confirm button. At the end of self-cleaning, the display will show “End”. 1. Set the function and temperature or grill level (see paragraph titled “Selecting cooking function”). Press the button until the indicator blinks next to the symbol . The display will show the selected time with the “-” sign before it. The oven will switch on 20 seconds later and the display will show the time remaining to end of cooking. At the end of the cooking time, the oven switches off automatically, a buzzer sounds and “End” is shown on the display. [. . . ] The “Keep Warm” function can only be selected in combination with functions. Set the cooking and end of cooking times. See sections titled “Selecting the cooking time” and “Selecting the end of cooking time”. Press button 1 until the red indicator blinks on the display next to the symbol and “-C” appears. [. . . ]