User manual WHIRLPOOL AKZ9635NB

[. . . ] DAILY REFERENCE GUIDE THANK YOU FOR PURCHASING A WHIRLPOOL PRODUCT To receive more comprehensive help and support, please register your product at www. Eu/register EN WWW You can download the Safety Instructions and the Use and Care Guide by visiting our website docs. Eu and following the instructions on the back of this booklet. Before using the appliance carefully read the Health and Safety guide. [. . . ] Please note: Placing the food in the oven before preheating has finished may have an adverse effect on the final cooking result. Opening the door during the preheating phase will pause it. The cooking time does not include a preheating phase. You can always change the temperature you want to reach using the knob. END OF COOKING An audible signal will sound and the display will indicate that cooking is complete. If necessary, turn the knob to set the time you want to confirm and start cooking to end, then press the function. Place the food in the oven and close the door: The function will start automatically after the period of time that has been calculated in order for cooking to finish at the time you have set. To extend the cooking time without changing the settings, turn the knob to set a new cooking time and . 6th SENSE FUNCTIONS TEMPERATURE RECOVERY If the temperature inside the oven decreases during a cooking cycle because the door is opened, a special function will be activated automatically to restore the original temperature. While the temperature is being restored, the display will show a “snake” animation until the set temperature has been reached. Please note: Programming a delayed cooking start time will disable the oven preheating phase. The oven will reach the temperature you require gradually, meaning that cooking times will be slightly longer than those listed in the cooking table. During the waiting time, you can use the knob to change the programmed end time. Press or to change the temperature and cooking time settings. While a programmed cooking cycle is in progress, the cooking time will be increased according to how long the door was open in order to guarantee best results. SPECIAL FUNCTIONS AUTOMATIC CLEANING - PYRO Do not touch the oven during the Pyro cycle. Keep children and animals away from the oven during and after (until the room has finished airing) running the Pyro cycle. Remove all accessories from the oven before running the Pyro function, including the shelf guides. If the oven is installed below a hob, make sure that all the burners or electric hotplates are switched off while running the self-cleaning cycle. For optimum cleaning results, remove the worst soiling with a damp sponge before using the Pyro function. Only run the Pyro function if the appliance contains heavy soiling or gives off bad odours during cooking. And turn the knob to Access special functions to confirm. [. . . ] Do not use the oven until the light cover has been refitted. 10 REMOVING AND REFITTING THE DOOR 1. To remove the door, open it fully and lower the catches until they are in the unlock position. Take a firm hold of the door with both hands – do not hold it by the handle. [. . . ]