User manual WHIRLPOOL AKZM 833 IXL

[. . . ] AKZM 833 EN User and maintenance manual Manuel d’utilisation et d’entretien IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. [. . . ] If the pre-set values are those desired, press the start button , otherwise proceed as inidcated above to change them. --:-COOK TIME SETTING THE TEMPERATURE/OUTPUT OF THE GRILL 200°C TEMPERATURE 180°C TEMPERATURE --:-COOK TIME No PREHEAT Forced Air --:-END TIME No PREHEAT Forced Air --:-END TIME Insert food on level 3 Press when done To change the temperature or output of the grill, proceed as follows: 1. Check that the cursor is positioned next to the temperature value (zone 1); press button to select the parameter to be changed: the temperature values flash. Use buttons to change to the desired value. The display indicates which shelf food should be placed on. The set temperature can also be changed during cooking by following the same procedure. At the end of cooking, the end of cooking message is displayed. At this point the oven can be switched off by pressing , or cooking can be prolonged by pressing . When switched off, the display shows the cooling bar which indicates the temperature inside the oven. EN9 PREHEATING THE OVEN 180°C TEMPERATURE --:-COOK TIME 180°C TEMPERATURE --:-COOK TIME 180°C TEMPERATURE --:-COOK TIME No PREHEAT Forced Air --:-END TIME No PREHEAT Forced Air --:-END TIME Yes PREHEAT Forced Air --:-END TIME If you wish to preheat the oven before inserting food, change the oven’s default selection as follows: 1. Using buttons and , move the cursor to preheating. Press button to select the setting: “No” flashes on the display. To change the setting, press or : “Yes” appears on the display. If you wish to preheat the oven quickly before inserting food, change the oven’s default selection as follows: 1. Select the fast preheating function using buttons . Confirm by pressing : the settings are shown on the display. If the proposed temperature is that desired, press , otherwise proceed as described in previous paragraphs to change it. An acoustic signal will sound when the oven has reached the set temperature. At the end of preheating, the oven automatically selects the conventional function . At this point food can be placed in the oven for cooking. If you wish to set a different cooking function, press and select the desired function. SETTING COOKING TIME 180°C TEMPERATURE --:-COOK TIME 180°C TEMPERATURE - 00:00 HH:MM 180°C TEMPERATURE - 00:20 HH:MM No PREHEAT Forced Air --:-END TIME No PREHEAT Forced Air --:-END TIME No PREHEAT Forced Air 19:20 END TIME This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by the selected function, after which the oven switches off automatically. [. . . ] To cook on more than one shelf, select the forced air function and stagger the position of the cake tins on the shelves, aiding optimum circulation of the hot air. To check whether a raising cake is cooked, insert a wooden toothpick into the centre of the cake. If the toothpick comes out clean, the cake is ready. If using non-stick cake tins, do not butter the edges as the cake may not rise evenly around the edges. [. . . ]