User manual WHIRLPOOL AM 269 INSTRUCTION FOR USE

[. . . ] in this programme spinning is intensive. Same as the spin cycle in the “Coloured Cotton” programme. A very gentle spin is used in this programme. Same as the spin cycle in the “Wool” programme. [. . . ] This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme. 1, 5 Yes Yes – – – – h – – – – – – – – 1000 1) 1000 1) 1, 0 – – – – – – – – – – – – – – 3, 0 Yes 1300 1, 0 5, 0 5, 0 Yes 400 2) 1300 1300 1000 1) – – – – – – – – – – – – – – – – – – – – – – – – 1, 5 – – – For improved garment care spin speed is restricted to 1000 rpm in this programme. For improved garment care spin speed is restricted to 400 rpm in this programme. 5019 401 15214 CONSUMPTION DATA * Programme White Cotton Coloured cotton Coloured cotton Synthetics Synthetics Rapid wash Delicate Wool Handwash Temperature (°C) 95 60 40 60 40 30 30 40 30 Load (kg) 5 , 0 5 , 0 5 , 0 2 , 5 2 , 5 3 , 0 1 , 5 1 , 0 1 , 0 Water (l) 44*** 39 39 55*** 50 35 50 50 35 Energy (kWh) 1 , 60 0 , 95 0 , 55 0 , 70 0 , 50 0 , 40 0 , 50 0 , 50 0 , 40 Programme duration ** approx. (hours : minutes) 1:55 2:00 2:00 1:30 1:15 0:30 0:45 0:40 0:35 “Speed Reduction” button • A maximum spin speed is assigned to each programme. € Press the button to set another speed for the spin cycle. € If the spin speed “0” is selected, the final spin is cancelled. €Easy Ironing” button • To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. Press the “Start/Pause” button again to restart the programme. € If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Interrupt/Cancel Programme). Press the “Start/Pause” button to interrupt the programme. The spin speed “0” and the remaining time “2 minutes” are displayed. Press the “Start/Pause” button to start the “Drain/Cancel” programme. * Consumption values were measured in normalized conditions in compliance with Standard IEC 60456. ** The programme duration may also vary from the chart values. The washing machine is able to allow for particular household conditions and to adapt the programme run time accordingly. *** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. [. . . ] *** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME Add the detergent as described in the chapter “Detergent and Additives” in the booklet. Turn the programme selector knob in any direction to the desired programme. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp above the “Start/Pause” button is flashing. [. . . ]