User manual WHIRLPOOL AQUASTEAM 9770 B PROGRAM CHART

[. . . ] made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or 3. 5 blends with cotton. Yes Yes Yes Yes Yes Yes Yes max. max. 2. 5 Curtains and delicate clothing, dresses skirts, shirts and blouses. woollens, labelled identified as machine washable. 2. 0 Onlyprogramme (40°C)with the Woolmark and by The Woolmark Company for machine washable wool. This is tested and approved wool “handwashable”. [. . . ] Only selectable within the temperature range of 40 to 60°C. The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702 Whirlpool is a registered trademark of Whirlpool USA 5019 301 06268 30106268GB. fm Page 2 Monday, March 30, 2009 3:25 PM CONSUMPTION DATA Programme Cotton (Anti-bacterial) Cotton Cotton with “Eco”*** Cotton Synthetics Synthetics Delicates Wool Handwash Big Items Sport Temperature (°C) 95 60 60 40 60 40 30 40 40 40 30 60 40 30 Jeans Lingerie Steam Auto Clean Steam Refresh 40 30 — — Load (kg) 9. 0 9. 0 9. 0 9. 0 3. 5 3. 5 2. 5 2. 0 2. 0 3. 0 3. 5 9. 0 6. 0 6. 0 7. 0 2. 0 — 1. 0 Water (l) 87** 82 69 82 46** 42 60 60 45 74 54 80 73 73 95 45 11 0. 5 Energy (kWh) 2. 60 1. 71 1. 53 0. 80 0. 85 0. 50 0. 40 0. 60 0. 60 0. 75 0. 55 1. 08 0. 60 0. 30 0. 85 0. 35 0. 50 0. 20 Approx. Programme Duration (hours : minutes)* 2:10 2:10 2:20 2:05 1:35 1:20 0:45 0:45 0:40 1:30 1:34 4:00 1:00 0:30 2:21 0:36 0:35 0:10 SAVE YOUR FAVOURITE PROGRAMMES If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just touching one button. • Select the desired programme, temperature, spin speed and option(s), touch and hold the “Favourites” button for at least 3 seconds. The lamp next to “Favourites” shortly blinks and then lights up - the programme setting is saved. Next time you want to use your individual programme setting, select the programme, shortly touch the “Favourites” button and start by touching “Start (Pause)”. If you want to replace the saved programme setting by another one: • Proceed as already described above - the previously saved programme setting will be replaced by the new one. CHILD LOCK Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. To activate the child lock: • The washing machine has to be switched on . • Touch the “Temperature” and the “Variable spin” buttons simultaneously for a few seconds until the key symbol on the display blinks - the key symbol will light afterwards to show that the child lock is active. The programme setting cannot be changed anymore; the only change possible is to either reset the running programme by touching and holding “Reset/Drain” for a few seconds, or to switch the washing machine of by pushing “On/Off” . To deactivate the child lock, proceed in the same way as for activating it. START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”. • Select programme, temperature, spin speed and options. • Touch the “Start delay” button to select a delay time step between 0:30 and 23:00 hours; a clock symbol appears next to the delay time on the display. • Touch the “Start (Pause)” button; the light stops blinking and becomes constant. The countdown of the delay time begins; the clock symbol and the colon between hours and minutes on the display blink. • The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. • The number of hours preselected can be changed by touching the “Start delay” button. To cancel the “Start delay” . . before you touch the “Start (Pause)” button: • Touch another programme button or set start delay time to “0:00” - the time delay disappears after a few seconds. . . after having touched the “Start (Pause)” button: Set the delay time to “0:00” - the time delay disappears after a few seconds; or touch “Start (Pause)” twice to start the programme immediately. RED FAILURE INDICATIONS If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”. PROGRAMME END • 1. • The display shows “End”, and the “Programme finished” indication lights up. Switch the machine off by pushing “On/Off” . [. . . ] • Selectable for laundry made of cotton and/or synthetics within temperature range of 40 to 60°C. As soon as you press “Start (Pause)”, the door will lock until the end of the programme and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Add garment” indication will blink. RESET A RUNNING PROGRAMME BEFORE THE END The “Reset/Drain” button cancels a programme before the end. [. . . ]