User manual WHIRLPOOL ARC 8140/1/AL INSTRUCTION FOR USE

[. . . ] 22 23 24 25 Listeria indicator 26 27 28 29 30 Function indicating the need to replace the antibacterial filter. [. . . ] After replacing the filter, keep the “OK” button pressed for about 5 seconds, until the alarm icon and he reminder go off. For both models: It is possible to switch the reminder icon off until the filter is replaced by pressing the ”OK” button. Successive reminders will be displayed approximately every 6 hours until you change the filter and reset the alarm. Listeria indicator (depending on model) - average temperature of the whole fridge compartment Checking the temperature After the appliance has been connected to the power supply for at least 24 hours, it is possible to check if the average temperature in the refrigerator compartment is the correct one and, if necessary, adjust the setting as indicated in the user instructions (see “Adjusting the temperature”). When the symbol is switched on, It indicates that the average temperature in the refrigerator compartment is proper. For optimum temperature adjustment, the refrigerator is provided with a temperature indicator allowing you to control the average temperature in the refrigerator compartment. If the symbol is switched OFF, it means that the average temperature inside the refrigerator is too warm; in this case adjust the tempature setting and wait for at least 12 hours before checking again if the tempature is proper. The internal temperature of the refrigerator depends on various factors such as the ambient temperature of the room, the amount of food stored and how often the door is opened. [. . . ] IMPORTANT: after opening the door or loading the refrigerator, it is normal if the symbol is switched OFF for some time, especially if room temperature is very warm. 31 32 33 34 35 36 37 38 39 40 [. . . ]