User manual WHIRLPOOL ARC7699 IX PROGRAM CHART

[. . . ] Our After-sales Service can supply this type of filter. CONTROL PANEL DESCRIPTION Compartments ON / OFF, menu, selection and confirmation buttons 1. 6. Refrigerator compartment Fridge stand-by - ON/OFF button Menu button Appliance ON/OFF button Selected compartment temperature increase button Confirmation button Selected compartment temperature decrease button. Shelves / Shelf area Multi-flow cold air system Multi-flow cold air vent Light bulbs Light cover Air intake area Cooler compartment (temperature lower than in the refrigerator compartment) 4. Refrigerator Compartment Functions and settings symbols 1. Functions and settings for the refrigerator compartment 2. [. . . ] Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours. ON/OFF This function turns off both the refrigerator and freezer compartments. To enable the stand-by function, press the “On-Off” button for 3 seconds, two hyphens appear on both displays to indicate that the appliance is on stand-by. To switch the appliance on again, follow the same procedure until the previously set temperature is shown on the display. When the appliance is on stand-by the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. Fridge Stand-by This function turns off the fridge compartment while the freezer compartment continues to run. To enable the stand-by function, press the “Fridge stand-by” button for 3 seconds. To switch the fridge compartment on again, follow the same procedure until the previously set temperature is shown on the display. When the fridge compartment is on stand-by the light inside the refrigerator compartment does not work. IMPORTANT: • If food is placed in the refrigerator before the appliance has • Turning the refrigerator and freezer controls to a cooler state cooled completely, it may deteriorate. than recommended setting will not cool the compartments any faster. • A built-in exterior moisture control continuously guards against moisture build-up on the front edges. Do not be alarmed if these edges sometimes feel warm to the touch. • The inside light switches on when the refrigerator door is opened. After 10 minutes of door opening the light switches off. GB Functions and settings for the freezer compartment Freezer compartment temperature setting Fast freezing For more efficient freezing activate this function 24 hours before freezing fresh food. To select the function, keep pressing the menu button until the display shows the fast freeze symbol . After 24 hours place the food to be frozen in the upper basket of the freezer compartment. The function is automatically disabled after 24 hours, or can be manually disabled by repeating the same procedure. Party mode To select the function, keep pressing the menu button until the display shows the party mode symbol . The symbol flashes, press “OK” to confirm. Use this function to chill drinks inside the freezer compartment. When the function is in operation, the symbol is animated. 30 minutes after selection (the time required to chill a 0. 75 l bottle without the glass breaking), the symbol flashes, an acoustic alarm sounds and the display lights up: remove the bottle from the freezer compartment and press the “OK” button to disable the function. [. . . ] These factors should be taken into account when setting the appliance. If the symbol is switched OFF, it means that the temp. inside the refrigerator is too warm; in this case adjust the temp. setting and wait for at least 12 hours before checking again if the temp. [. . . ]