User manual WHIRLPOOL ARC7699 IX AQUA PROGRAM CHART

[. . . ] 7. Shelves / Shelf area (removable) Multi-flow cold air system Multi-flow cold air vent Light bulbs Light cover Air intake area Cooler compartment (temperature lower than in the refrigerator compartment) 4. Refrigerator Compartment Refrigerator compartment Stand-by - fridge button Menu button Appliance ON/OFF button Selected compartment temperature increase button “+” Confirmation button Selected compartment temperature decrease button “-” Water paddle. Functions and settings symbols 1. Functions and settings for the refrigerator compartment 2. Appliance, alarm and malfunction symbols 3. [. . . ] After 24 hours place the food to be frozen in the upper basket of the freezer compartment. The function is automatically disabled after 24 hours, or can be manually disabled by repeating the same procedure. Party mode To select the function, keep pressing the menu button until the display shows the party mode symbol . The symbol flashes, press “OK” to confirm. Use this function to chill drinks inside the freezer compartment. When the function is in operation, the symbol is animated. 30 minutes after selection (the time required to chill a 0. 75 l bottle without the glass breaking), the symbol flashes, an acoustic alarm sounds and the display lights up: remove the bottle from the freezer compartment and press the “OK” button to disable the function. Important: do not leave the bottle inside the freezer compartment longer than the time necessary for chilling. Water dispensing To dispense water press a glass against the water dispenser paddle, removing the glass to stop dispensing. It is not necessary to press hard on the paddles to activate the dispenser Pressing hard will not result in faster dispensing or greater quantities. If the dispenser does not dispense water when the paddle is pressed: During the first delivery, there will be a delay of 15 to 20 seconds due to the system needing to fill with water. GUIDE TO SELECTING FUNCTIONS Functions are not available until the freezer compartment reaches the temperature below -12°C. Functions and settings for the refrigerator compartment. Refrigerator compartment door open Refrigerator compartment temperature setting Fast cooling This function should be selected before refrigerating fresh food. To select the function, keep pressing the menu button until the display shows the fast cooling symbol. The symbol flashes, press “OK” to confirm. The function is automatically disabled after 6 hours, or can be manually disabled by repeating the same procedure. GB Other functions “6th Sense” function The 6th Sense function is automatically activated when: • a large amount of food is loaded into the refrigerator and/or freezer • the refrigerator and/or freezer door is left open for a long time • a prolonged power failure takes place, causing the internal temperature of the appliance to increase to values that cannot guarantee safe storage of food. The symbol flashes for approximately 3 seconds, after which it remains permanently lit until optimal storage conditions have been automatically restored. Control panel lock function This function prevents anyone from inadvertently changing settings or switching off the appliance. To lock the control panel, press buttons “+” - “OK” - “-” at the same time for 3 seconds until the display shows the symbol : an acoustic signal confirms the function has been selected. To disable the function, follow the same procedure until the symbol switches off. Alarms In the event of an alarm, the acoustic alarm and indicator lights are activated. Freezer temperature alarm The acoustic alarm sounds: alarm symbol lights up and the temperature indicator flashes. The alarm is activated when: • The appliance is connected to the power supply for the first time or after prolonged disuse • The freezer compartment temperature is too high • The quantity of foods loaded into the freezer exceeds that indicated on the data plate • The freezer door has been left open for a long time Note: in these cases automatically appears on the display . Power failure alarm The maximum temperature reached during a power failure flashes on the freezer display. [. . . ] Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the reservoir shelf and crisper bin. Remove the cartridge cap by sliding it off the end of the old cartridge. Take the new cartridge out of its packaging and remove the protective cover from the o-rings. Slide the cartridge cap onto the new cartridge as shown. [. . . ]