User manual WHIRLPOOL ARC8020 IX PROGRAM CHART

[. . . ] Our After-sales Service can supply this type of filter. CONTROL PANEL DESCRIPTION Compartments ON/OFF, menu, selection and confirmation buttons 1. 6. Refrigerator compartment Fridge stand-by - ON/OFF button Menu button Appliance ON/OFF button Selected compartment temperature increase button Confirmation button Selected compartment temperature decrease button. A. 13. Functions and settings symbols Multi-flow cold air system Light bulbs Antibacterial filter grille, air intake area Light cover Multi-flow cold air vent Shelves / Shelf area Cooler compartment (temperature lower than in the refrigerator compartment) Rating plate Crisper drawer Air control Crisper divider Separator (depending on the model) Door trays Ice tray Shelves (depending on the model) Storage basket for frozen food items Freezer compartment door trays (for pizza or other frozen food with short storage time) 1. Functions and settings for the refrigerator compartment 2. [. . . ] After 10 minutes of door opening the light switches off. For more efficient freezing activate this function 24 hours before freezing fresh food. To select the function, keep pressing the menu button until the GUIDE TO SELECTING FUNCTIONS Functions are not available until the freezer compartment reaches the temperature below -12°C. Functions and settings for the refrigerator compartment. Refrigerator compartment door open Refrigerator compartment temperature setting Vacation This function turns the refrigerator compartment to a warmer state if you are going away for some time. To select the function, keep pressing the menu button until the display shows the symbol (vacation). To turn the refrigerator back to setting point repeat this procedure. Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours. After 24 hours place the food to be frozen in the upper basket of the freezer compartment. The function is automatically disabled after 24 hours, or can be manually disabled by repeating the same procedure. Party mode To select the function, keep pressing the menu button until the display shows the symbol (party mode). The symbol flashes, press “OK” to confirm. Use this function to chill drinks inside the freezer compartment. When the function is in operation, the symbol is animated. 30 minutes after selection (the time required to chill a 0. 75 l bottle without the glass breaking), the symbol flashes, an acoustic alarm sounds and the display lights up: remove the bottle from the freezer compartment and press the “OK” button to disable the function. Important: do not leave the bottle inside the freezer compartment longer than the time necessary for chilling. GB Appliance, alarm and malfunction symbols “6th Sense” function The 6th Sense function is automatically activated when: • a large amount of food is loaded into the refrigerator and/or freezer, • the refrigerator and/or freezer door is left open for a long time, • a prolonged power failure takes place, causing the internal temperature of the appliance to increase to values that cannot guarantee safe storage of food. The symbol flashes for approximately 3 seconds, after which it remains permanently lit until optimal storage conditions have been automatically restored. Control panel lock function This function prevents anyone from inadvertently changing settings or switching off the appliance. To lock the control panel, press buttons “+”, “OK”, “-” at the same time for 3 seconds until the display shows the symbol : an acoustic signal confirms the function has been selected. To disable the function, follow the same procedure until the symbol switches off. Alarms In the event of an alarm, the acoustic alarm and indicator lights are activated. Freezer temperature alarm The acoustic alarm sounds: alarm symbol lights up and the temperature indicator flashes. [. . . ] The refrigerator compartment can now be emptied and cleaned. REPLACING THE LIGHT BULB Always disconnect the refrigerator from the power supply before replacing any light bulbs. If the inside light is not working: • Remove the light cover. Push and unblock the three catches in the lower part of light cover using the small srewdriver, then open and remove from upper holes. • Check the light bulb and if necessary replace it. • Pull the bulb towards the outside of the lamp holder. [. . . ]