User manual WHIRLPOOL ARF 702/A PRODUCT FICHE

[. . . ] Any damage must be reported to the dealer within 24 hours of delivery of the appliance. Wait at least two hours before switching the appliance on, to ensure that the refrigerant circuit is fully efficient. Installation and electrical connection must be carried out by a qualified technician according to the manufacturer’s instructions and in compliance with local safety regulations. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. [. . . ] Please read these instructions carefully, as they include a description of your appliance and the useful hints to enable you to achieve the best performances required to freeze fresh food and to store already frozen food. DESCRIPTION OF THE APPLIANCE (Fig. Adjustable feet Some models are supplied with containers filled with cooling liquid(eutectics): remove them from the back of the basket (4) and position them next to each other inside the basket. Fig. Power light (green) INSTALLATION Ensure that the appliance is not damaged. Transit damages must be reported to your dealer within 24 hours of receipt of the appliance. The appliance should not be installed close to heat sources such as cookers, central heating, boilers, sunlight, etc. It must however be located in a well ventilated dry space. If the following type of installation cannot be avoided, respect these side distances: a) between appliance and oil or coal stoves: 30 cm minimum. b) between appliance and gas or electric cooker: 3 cm minimum. The appliance must stand on a stable and level surface: install it following the instructions given on the rear of the template, delivered with the appliance. Leave the appliance to stand for two hours before connecting it to the electricity supply. We suggest that during this time the interior is cleaned with a sponge dampened in a solution of water and vinegar, after which the baskets can be fitted into the appliance. To freeze the maximum quantity of foods allowed, switch on the fast freeze facility (4) (yellow light on) 24 h prior to loading the foods, which should be positioned directly on the grid without using the baskets. At completion of the freezing-in operation, switch off the fast freeze facility (yellow light off). The freezing-in time diminishes for loads less than the maximum. Very small loads can be frozen without switching on the fast freeze facility. Never re-freeze partially or completely defrosted foods. Prepare and wrap foods to be frozen in aluminium or plastic foils or place them in appropriate containers. Label the packets indicating the freezing-in date and the contents. The freezer compartment maintains the storage temperature for 15 hours approx. We suggest however you leave the door closed during this time. Fizzy drinks should not be frozen and some products, such as flavoured water ices, should not be consumed too cold. Note: Due to the efficiency of the door seal, it is not always possible to open the freezer door immediately after closing it. [. . . ] If you have followed this trouble shooting guide and your freezer still does not work properly, get in touch with your Retailer or Service Agent. State clearly what is wrong and the type and serial number of your freezer. 9 60202028GB. fm Page 10 Wednesday, December 10, 2008 9:31 AM INSTALLATION AND DOOR REVERSIBILITY • Do not install the appliance near a heat source (minimum distances: 30 cm from solid fuel or gasoil stoves, 3 cm from electric ovens and hobs). • Install the appliance in a dry and wellventilated place. • Clean the appliance interior (see relevant chapters). [. . . ]