User manual WHIRLPOOL AVM 541/WH INSTRUCTION FOR USE

[. . . ] 95° 1 2 3 4 5 6 7 8 9 10 — — — — — — — — — — — Cotton short Synthetics Synthetics short Delicates Wool Silk Rinse + spin Spin Gentle spin Drain Normally soiled bed linen, table linen and underwear, towels, shirts etc. Made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. Normally soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton. [. . . ] Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. If you select “Rinse Hold” do not leave items to soak for too long. textiles made of linen , silk , wool and viscose marked as “handwashable”. If you select “Rinse Hold” do not leave items to soak for too long. 30° — — — — With this programme you can add starch and/or fabric softener. The programme ends with an intensive spin cycle. in this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. CLEANING THE FILTER To ensure an impeccable function of the pump, check the filter regular and clean it if necessary. programme • • Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet. Set the programme selector to the desired programme. Set the temperature selector to the desired temperature. Check that the door is well closed and turn on the washing machine by pressing the “ON/OFF” button. [. . . ] sELECT ANY DESIRED OPTION “Spin Speed Reduction” button • Reduces the predetermined automatic maximum spin speed. In some programmes the maximum final spin speed is limited to go easy on your laundry items. Selection of a higher spin speed is not possible. [. . . ]