User manual WHIRLPOOL AWG 5102/K PRODUCT FICHE

[. . . ] This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Curtains and delicate clothing in wool or silk only washable in cold water. Garments made of linen, silk, wool and viscose marked as “handwashable”. Outer clothing worn for short periods and made of cotton, polyester, polyamide and cotton blends. [. . . ] Max. Lavaggio a freddo Risciacquo Scarico/Centrifuga — — — — — — 6. 0 6. 0 6. 0 — — L: 1) optional / Yes : dosing required For improved garment care, spin speed is restricted in these programmes. The “wool” programme of this washing machine has been approved by The Woolmark Company for the washing of garments labelled as “machine washable”. Follow the instructions given on the label sewn on the garment and the instructions supplied by the washing-machine manufacturer. M0402-M0403-M0404-M0405). Whirlpool is a registered trademark of Whirlpool USA 5019 301 20221 Black process 45. 0° 150. 0 LPI 30120221GB. fm Page 2 Friday, November 7, 2008 3:50 PM CONSUMPTION DATA Programme Cotton Cotton Cotton*** Cotton Synthetics Synthetics Delicates Wool Handwash Quick wash Mixed fabric Temperature Load Water Energy (°C) (kg) (l) (kWh) 90 6. 0 63. 1** 1. 89 75 6. 0 60. 3 1. 45 60 6. 0 60. 1 0. 98 40 6. 0 50. 9 0. 69 60 3. 0 51. 6** 0. 87 40 3. 0 43. 5 0. 46 30 3. 0 53. 4 0. 13 40 1. 5 49. 1 0. 22 30 2. 5 46. 8 0. 15 35 3. 0 35. 9 1. 19 40 4. 0 50. 3 0. 37 Approx. programme duration (hours : minutes)* 1:53 1:54 2:10 1:45 1:41 1:31 0:43 0:40 0:47 0:35 1:20 START DELAY The “Start Delay” option allows you to programme machine activation at a later stage, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”. • Select the programme and options. • Press the “Start Delay” button to select programme start a delay time of 1 to 12 hours; • Press the “Start” button. The indicator next to the “Start Delay” button lights up, whereas the selection indicator flashes to signal the countdown of the remaining time. • At the end of the delay time the machine starts the set programme. The LED indicating the wash stage in progress lights up. • After pressing the “Start”, the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. Leave the door ajar to allow the drum to dry. CHANGING PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Turn the programme selector to “Off/O”. Select the new programme, any options and another spin speed if you want. Press the “Start” button again. The new programme resumes the wash programme from where the previous one was interrupted. Do not add detergent for this programme. CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END • Reset by turning the programme selector to “Off/0” and select the “Drain/Spin” programme to remove the water remaining in the bowl before the door can be opened. ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in the Instructions for Use. Turn the programme selector to the desired programme. The indicator of the predefined spin speed lights up; in case you want to set another spin speed, press the “Variable spin” button. SELECT ANY DESIRED OPTION Press the button(s) of any required option(s) - the respective indicator lights up. [. . . ] • This option is particularly suitable for areas with very soft water, washing baby linen, and helps people with allergies. “Easy Ironing” button • Can be used together with “Cotton”, “Synthetic” and “Daily load” programmes to make ironing easier. • Increases the water quantity and the clothes are spun very gently. “Rinse hold” button • The laundry remains in the last rinse water without the final spin cycle, to avoid creasing and prevent colours from changing. • This option is particularly recommended for the “Synthetics”, “Mixed fabric” or “Delicates” programmes. [. . . ]