User manual WHIRLPOOL AWG 550 PRODUCT FICHE

[. . . ] Contact After-Sales Service or your local retailer. • Check that the accessories and supplied parts are all present. • Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. • If the appliance was exposed to the cold before delivery, keep it at room temperature for a few hours before operating. • Water supply: • Water tap: Cold water only (unless otherwise indicated on the programme chart) 3/4” threaded hose connector” • Water pressure (flow pressure): 100-1000 kPa (1-10 bar). [. . . ] nylon stockings, belts etc. ) and items with hooks (e. g. bras) in a washbag or pillow case with a zip fastener. Always remove curtain glides or wash curtains with the glides inside a cotton bag. Stain removal • Blood, milk, eggs etc. are generally removed by the automatic enzyme phase of the programme. • For stains made by red wine, coffee, tea, grass, fruit etc. add a stain remover to the main wash chamber of the detergent dispenser. • Pre-treat heavily-soiled areas with stain remover if necessary. Dyeing and bleaching • Only use dyes and bleaches that are suitable for washing machines. • Follow the manufacturer’s instructions. • Plastic and rubber parts of the washing machine can be stained by dyes or bleaches. LOADING THE LAUNDRY 1. Unfold the laundry and place it loosely in the drum. Observe the load sizes given in the quick reference guide. Now unscrew the filter completely and extract it. Tilt the appliance forwards carefully to allow the water to flow out. Clean the filter and the filter chamber. Check that the pump impeller can still rotate. Re-insert the filter and screw it in clockwise as far as it will go. Pour about 1 l of water into the detergent dispenser to reactivate the ecosystem”. Check that the filter is inserted properly and securely. Reinstall the plinth or the cover, depending on the model. Select a programme and start it. B C GB 8 CARE AND MAINTENANCE Appliance exterior and control panel • Can be washed down with a soft, damp cloth. • A little neutral detergent (non abrasive) can also be used • Dry with a soft cloth. Door seal • Clean with a damp cloth when necessary. • Check the condition of the door seal regularly. Filter • Check and clean the filter regularly, at least two or three times a year (see “Removing the filter / Draining residual water”) Appliance internal parts • After each wash, leave the door open for some time to allow the inside of the appliance to dry. [. . . ] Try to remedy the problem yourself (see “Troubleshooting Guide”). Restart the programme to check whether the problem has solved itself. If the washing machine continues to function incorrectly, call After Sales Service. The After Sales Service sticker can be found inside the door. [. . . ]