User manual WHIRLPOOL AWG 5600 PRODUCT FICHE

[. . . ] • Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. • If the appliance was exposed to the cold before delivery, keep it at room temperature for a few hours before operating. • Water tap: 3/4” threaded hose connector” • Water pressure (flow pressure): 100-1000 kPa (1-10 bar). • Use only new hoses to connect the washing machine to the water supply. [. . . ] Select and start a short programme (see separate “Programme Chart”). GB 5 Black process 45. 0° 150. 0 LPI 30120031GB. fm Page 6 Thursday, January 8, 2009 2:58 PM PREPARATION OF THE WASHING 1. Sort the load according to. . . • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwash items. • Colour Separate coloured and white items. • Loading Wash items of different sizes in the same load to improve washing efficiency and distribution in the drum. nylon stockings, belts etc. ) and items with hooks (e. g. bras) in a washbag or pillow case with a zip fastener. Always remove curtain glides or wash curtains with the glides inside a cotton bag. Stain removal • Blood, milk, eggs etc. are generally removed by the automatic enzyme phase of the programme. • For stains made by red wine, coffee, tea, grass, fruit etc. add a stain remover to the main wash chamber of the detergent dispenser. • Pre-treat heavily-soiled areas with stain remover if necessary. Dyeing and bleaching • Only use dyes and bleaches that are suitable for washing machines. • Follow the manufacturer’s instructions. Prewash Chamber • Detergent for the prewash Main Wash Chamber • Detergent for the main wash • Stain remover • Water softener Softener Chamber • Fabric Softener • Liquid starch Pour additives only up to the “MAX” mark”. Open the filter but do not remove it completely. Slowly turn the filter counterclockwise (fig. Now unscrew the filter completely and extract it. Tilt the appliance forwards carefully to allow the water to flow out. Clean the filter and the filter chamber. Check that the pump impeller can still rotate. Re-insert the filter and screw it in clockwise as far as it will go. Pour about 1 l of water into the detergent dispenser to reactivate the ecosystem”. Check that the filter is inserted properly and securely. Reinstall the plinth or the cover, depending on the model. [. . . ] • the mesh filters of the water supply could be blocked (see “Care and maintenance”. When the problem has been resolved, re-start the programme by pressing the “Start” button. If the fault occurs again, contact the After-Sales Service [see next chapter). The water is not pumped out of the washing machine. [. . . ]