User manual WHIRLPOOL AWO 12967 PROGRAM CHART

[. . . ] Whirlpool wool machine washable programme is officially certified and endorsed by the Woolmark Institute. Textiles made of linen, silk, wool or viscose marked as “handwashable”. Whirlpool wool handwashable programme (40°C) is officially certified and endorsed by the Woolmark Institute. Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. [. . . ] **** Reference Programme for Energy Label PROGRAMME END • The time remaining on the display shows 0:00, and displays “END OF CYCLE”. Turn the programme selector with the marking to the top. Open the door and unload the machine. POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME Add the detergent as described in the chapter “Detergent and Additives” in the booklet. Turn the programme selector knob in any direction to the desired programme. This appears in the display, together with spin speed, wash temperature and wash programme duration (in hours and minutes). The indicator light on the “Start/ Pause” button will blink. Temperature and spin speed can be changed using the “menu” button as well as the “ ” and “ ” buttons. The additional options available for the wash programme can be selected with the “menu” button. “Prewash” • Only for heavily soiled laundry (for example. Programme duration is increased by some 15 min. RESELECT AFTER PROGRAMME START A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent. Press the “Start/Pause” button to interrupt the programme. The “Start/Pause” symbol blinks. Select the new programme (with temperature), any additional options and - if you wish - another spin speed. In this way you can also select an additional option later, without changing the current programme. Press the “Start/Pause” button again to re-start the programme. • If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel/Delete programme”) “Intensive rinse” • An additional rinse cycle is carried out. • This additional option is particularly suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies. START DELAY The “Start Delay” allows you to run the machine at your convenience, for example at night when electricity is cheaper. • Press the “Start Delay” button. Using the “ ” and “ ” keys, you can set the time on the display to when you want the wash programme to start, then confirm this with “OK”. • Press the “Start/Pause” button. [. . . ] The wash programme will then be stored in the selected storage location and can be selected again at any time.  xD Confirm with “OK”. It will appear on LCD display with the preset speed and temperature. You can now start the wash programme, or change the temperature and spin speed and, if required, select additional options. Press the “Menu” button to select additional functions (please follow the instructions on the LCD display). The additional options you can choose are displayed as symbols on the LCD display: PreWash Intensive Rinse Rinse Hold Eco Easy Iron Press the “Info” button to obtain additional information. Cancelling stored wash programmes As soon as you have selected the desired additional options, you can start the wash programme, by pressing the flashing Start symbol on the programme selector knob. [. . . ]