User manual WHIRLPOOL AWO/C 70081 PROGRAM CHART

[. . . ] Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry. [. . . ] The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. max. max. 40 °C 400 1) max. max. ------- = optional / Yes = dosing required For improved garment care, spin speed is restricted in these programmes. Whirlpool is a registered trademark of Whirlpool USA. 5019 301 06563 14/10/11 09. 38 30106563GB. indd 1 CONSUMPTION DATA Programme Cotton Cotton* Cotton* Cotton Cotton* Cotton rapid Synthetics Synthetics Synthetics Delicates Quick wash Wool Wool Handwash Temperature (°C) 95 60 60 40 40 60 60 40 30 30 30 40 20 40 Load (kg) max. 3. 0 3. 0 3. 0 1. 5 3. 0 1. 0 1. 0 1. 0 Water (l) 59 49 37 60 37 49 50 46 46 60 41 60 60 45 Energy (kWh) 1. 90 0. 78 0. 70 0. 70 0. 60 1. 02 0. 80 0. 50 0. 30 0. 50 0. 40 0. 50 <0. 10 0. 50 Approx. Duration (hours : minutes) 2:00 4:00 2:30 2:45 2:30 2:20 1:35 1:20 1:16 0:45 0:30 0:45 0:40 0:40 PROGRAMME START PROGRAMME END Open the tap and press the “Start/Pause” button . The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Drain/Spin. “DOOR OPEN” INDICATION • All the lights of the programme sequence indicator are off, and the “Door open” indication lights up. Turn the programme selector to the “Off/O” position. Leave the door ajar to allow the drum to dry. 1. 2. 3. 4. Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption data refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.  programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also The “Troubleshooting Guide” in your Instructions for Use). * Reference programmes for Energy Label. Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. [. . . ] “Spin speed reduction” button • Reduces the predetermined automatic maximum spin speed to treat your laundry more gently. Note: The programme stops to “Rinse hold”  at the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the “Start/Pause” button blinks. Terminate the “Rinse hold” option • : for a Press and hold the “Reset” button few seconds. [. . . ]