User manual WHIRLPOOL AWO/D 1400 EX INSTRUCTION FOR USE

[. . . ] Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. Normally to heavily soiled cotton laundry washable at 60°C. Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C. Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. Detergents and additives Prewash Main wash Softener Special options Spin speed reduction Rinse hold Programme Care Labels Max. [. . . ] Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. Detergents and additives Prewash Main wash Softener Special options Spin speed reduction Rinse hold Programme Care Labels Max. Spin Speed rpm 95 °C 7. 0 Yes Yes max. 95 °C 40 - 60 °C 60 °C 60 °C 7. 0 7. 0 7. 0 3. 0 ------------------Yes Yes Yes Yes Yes max. max. max. max. 30 - 40 - 60 °C 30 °C 3. 0 1. 5 4. 0 Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. ------------------- Yes Yes Yes max. Curtains and delicate clothing, dresses, skirts, shirts and blouses. Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry. Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Same as the last rinse and the final spin in the “Cotton” programme. Same as spin cycle in the “Cotton” programme. 4. CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start/Pause” button programme. to pause the Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption data refer to the default setting of the programmes; selecting special options or modifying spin The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). Reference programmes for Energy Label. Select the new programme and, if you want, any options. The Press the “Start/Pause” button new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. ** ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. • Turn the programme selector to the desired programme and temperature. to the “Start/Pause” button SELECT ANY DESIRED OPTION Push the button of any option desired - the respective indication lights up. [. . . ] • Turn the programme selector to the desired programme and temperature. to the “Start/Pause” button SELECT ANY DESIRED OPTION Push the button of any option desired - the respective indication lights up. If the combination of programme and option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. [. . . ]