User manual WHIRLPOOL AWO/D 4605 PRODUCT FICHE

[. . . ] Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C. Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. Curtains and delicate clothing, dresses, skirts, shirts and blouses. [. . . ] Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry. Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. Same as the spin cycle in the “Wool” programme. “Clean pump” Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use). 1. Press the “Start/Pause” button to pause the programme. 2. Select the new programme (with temperature), and any options if you want. 3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END The “Reset” button cancels a programme before the end. • Press and hold the “Reset” button for a few seconds. It may last some time until the door can be opened. ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. • Turn the programme selector to the desired programme and temperature. • The indication lamp next to “Start/Pause” button blinks. SELECT ANY DESIRED OPTION “Rinse hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. [. . . ] • Turn the programme selector to the desired programme and temperature. • The indication lamp next to “Start/Pause” button blinks. SELECT ANY DESIRED OPTION “Rinse hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. • Particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indication is on. [. . . ]