User manual WHIRLPOOL AWO/D 610 PRODUCT FICHE

[. . . ] Textiles made of linen, silk, wool and viscose marked as “handwashable”. 1. 0 If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme. 1. 0 This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended). Lingerie 30 °C Rinse & Spin Spin Gentle Spin Drain — — — — 7. 0 Same as the last rinse and the final spin in the “Cotton” programme. [. . . ] Same as the spin cycle in the “Wool” 1. 0 programme. Alternative method of terminating programme after “Rinse Hold”. — — — — — ❉: 1) optional / Yes : dosing required For improved garment care, spin speed is restricted to 400 rpm in this programme. Whirlpool is a registered trademark of Whirlpool USA 5019 301 06132 Black process 45. 0° 100. 0 LPI 30106132GB. fm Page 2 Thursday, January 24, 2008 5:46 PM CONSUMPTION DATA Programme Cotton / Antibacterial Cotton Cotton with “Eco”*** Cotton Synthetics Synthetics Delicates Daily load Quick wash Wool Handwash Lingerie Temperature Load (°C) (kg) 95 7. 0 60 7. 0 60 7. 0 40 7. 0 60 3. 0 40 3. 0 30 1. 5 40 4. 0 30 4. 0 40 1. 0 40 1. 0 30 1. 0 Water Energy (l) (kWh) 74** 2. 10 69 1. 33 54 1. 19 69 0. 75 46** 0. 80 42 0. 40 60 0. 50 48 0. 50 48 0. 25 60 0. 55 45 0. 55 45 0. 45 Approx. Programme Duration (hours : minutes)* 2:10 2:10 2:20 2:05 1:35 1:20 0:45 1:00 0:30 0:45 0:40 0:40 “Variable spin” button • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only. RED INDICATIONS “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service. “Water tap closed” The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use. “Clean pump” Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”). START DELAY The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. • Increases the water quantity and the clothes are spun very gently. “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies. “Rinse hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. • This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”. • It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the “Start/ flashes. Pause” button Terminate the “Rinse hold” option : • Press the “Start/Pause” button ; the programme will terminate automatically with the final spin cycle for the present wash programme. • If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button . CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start/Pause” button programme. [. . . ] to pause the PROGRAMME START Open the tap and press the “Start/Pause” button . The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. [. . . ]