User manual WHIRLPOOL AWOE 8101/-30 DOSI W PRODUCT FICHE

[. . . ] Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets. Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial fibres; sleeping bags, bathmats and similar items. [. . . ] M0702 Whirlpool is a registered trademark of Whirlpool USA 5019 301 06267 Black process 45. 0° 150. 0 LPI 30106267GB. fm Page 2 Thursday, March 19, 2009 1:10 PM CONSUMPTION DATA Programme White Cotton / Antibacterial Cotton*** Cotton Synthetics Synthetics Delicates Wool Handwash Jeans Big Items Sport SuperEco Daily load Speed 15 Temperature (°C) 95 60 40 60 40 30 40 40 40 40 30 60 40 30 Load (kg) 8. 0 8. 0 8. 0 3. 5 3. 5 2. 5 2. 0 2. 0 7. 0 3. 0 3. 5 8. 0 6. 0 3. 0 Water (l) 82** 64 77 46** 42 60 60 45 95 74 54 75 73 30 Energy (kWh) 2. 40 1. 36 0. 75 0. 85 0. 50 0. 40 0. 60 0. 60 0. 80 0. 75 0. 55 0. 95 0. 60 0. 20 Approx. Programme Duration (hours : minutes)* 2:10 2:20 2:05 1:35 1:20 0:45 0:45 0:40 2:21 1:30 1:34 4:00 1:00 0:15 START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”. • Select programme, temperature and options. • Press the “Start delay” button to select a delay time up to 23 hours; the light of the “Start (Pause)” button blinks. • Press the “Start (Pause)” button; the countdown of the delay time begins. The light of the “Start (Pause)” button is on; the light of the start delay button will keep blinking until the programme starts. • As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off. • Once having pressed the “Start (Pause)” button, the number of hours preselected can be changed by pressing and holding the “Start delay” button. To cancel the “Start delay” . . before you press “Start (Pause)”: • Turn the programme selector to another position or press the “Reset/Drain” button. . . after having pressed “Start (Pause)”: • Press “Start (Pause)” - the delay time disappears from the display; press “Start (Pause)” again to start the selected programme immediately. • Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. “DOOR OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show that the door can be opened. • Choose temperature of 30 or 40°C and use with maximum load. • Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions. • Prolongs the programme by approx. • Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!“Easy ironing” button • Helps to make ironing easier. • Increases the water quantity and the clothes are spun very gently. “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. “Variable spin” button • Every programme has a predefined spin speed. • Press the button to set another spin speed. [. . . ] Press “Start (Pause)” to pause the programme; the light blinks. Select the new programme, temperature, any options and another spin speed if you want. Press “Start (Pause)” again. The light is on, and the programme continues continues at the same position where the previous programme was interrupted. [. . . ]