User manual WHIRLPOOL AWOE S9110 PRODUCT FICHE

[. . . ] Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Black and dark garments made of cotton, cotton blends and polyester. Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme. [. . . ] Same as the last rinse and the final spin in the “Cotton” programme. “Soil level” indications “Start delay” indication “Child lock” indication “Detergent overdosage” indication “Dosing aid” indication “Detergent calibration” indication Failure indications (depending on the model) Selectable options Dosing Start aid delay Spin Spin Max. Spin Speed rpm 6 4 Detergents and additives 5 3 Programme Temperature Care Labels Prewash Main Softener Colours Rapid Soil Prewash Intensive Tumble wash 15° level rinse fresh / — ❉ ❉ ❉ — — ❉ ❉ — — — ❉ ❉ — Yes Yes Yes Yes Yes Yes Yes Yes Mixed Cotton Synthetics Fabrics Delicates Wool/ Handwash White Colours Light colours Dark cold - 60 °C cold - 95 °C cold - 60 °C cold - 40 °C cold - 40 °C cold - 60 °C cold - 60 °C cold - 60 °C ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ — ❉ ❉ ❉ — — ❉ ❉ — — — ❉ ❉ — ❉ ❉ ❉ — — ❉ — ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ max. 1000 1) max. — ❉ — ❉ — ❉ — ❉ ❉ ❉ SuperEco AquaEco Speed 15 Specials Bedlinen Big Items Rinse & Spin cold - 60 °C cold - 40 °C cold - 30 °C cold - 95 °C cold - 60 °C 7. 0 3. 0 3. 0 3. 5 3. 0 Yes Yes Yes Yes Yes — ❉ — — — — — ❉ — ❉ — — Eco — — 8. 0 — ❉: 1) optional / Yes : dosing required For improved garment care, spin speed is restricted in these programmes. The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702 Whirlpool is a registered trademark of Whirlpool USA 5019 301 06526 Black process 45, 0° 150, 0 LPI 30106526GB. fm Page 2 Tuesday, July 12, 2011 2:55 PM CONSUMPTION DATA Programme Mixed Cotton Cotton* Cotton* Cotton Cotton* Synthetics Synthetics Delicates Wool/Handwash White Light colours Dark SuperEco AquaEco Speed 15 Bedlinen Big Items Temperature (°C) 40 95 60 60 40 40 60 40 30 40 40 40 40 60 40 30 60 40 Load (kg) 6. 0 8. 0 8. 0 4. 0 8. 0 4. 0 3. 5 3. 5 2. 5 2. 0 8. 0 5. 5 5. 0 8. 0 3. 0 3. 0 3. 5 3. 0 Water (l) 73 82** 59 41 77 49 46** 42 60 45 77 70 45 75 19 30 60 74 Energy (kWh) 0. 60 2. 40 1. 04 1. 00 0. 75 0. 60 0. 85 0. 50 0. 40 0. 60 0. 85 0. 50 0. 60 0. 95 0. 45 0. 20 1. 30 0. 75 Approx. Programme Duration (hours : minutes) without “Rapid” with “Rapid” 1:00 — 2:10 — 4:00 2:30 3:00 *** 3:15 2:15 3:00 *** 1:55 1:14 1:40 0:59 0:45 — 0:40 — 2:20 — 1:20 — 1:40 1:15 4:00 — 1:00 — 0:15 — 2:00 — 1:30 — • If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the “Rinse hold”, press the “Spin” button repeatedly until the “Rinse hold” symbol on the display lights up. - The wash programme stops to “Rinse hold” when the “Rinse hold” symbol on the display blinks. The light of “Start (Pause)” button blinks as well. - To terminate the “Rinse hold” by draining the water, without any spinning, press the “Start (Pause)” button. - To terminate the “Rinse hold” by spinning the laundry, press the “Spin” button to select the desired spin speed and then “Start (Pause)” to start the spin cycle. - Do not leave the laundry to soak for too long in the “Rinse hold”. PROGRAMME START Open the tap and press the “Start (Pause)” button . 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). * Reference programmes for Energy Label. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. *** Automatic adaptation of programme duration after detection of wash load. FAILURE INDICATIONS If one of the failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”. PROGRAMME END • The display shows “End”, and the “Programme finished” indication lights up. Turn the programme selector to the “Off/O” position. • Leave the door ajar to allow the drum to dry. • If you do not turn the programme selector to the “Off/O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display. ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme. [. . . ] • After the “tumble fresh” period has run out, the display indicates “End”. “Rinse Hold” ) • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled, and the water is drained out only. [. . . ]