User manual WHIRLPOOL AWOK 7015 PRODUCT FICHE

[. . . ] Select spin speed according to the manufacturer's recommendations on the care label. Normally to heavily soiled and robust white cotton laundry. Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent. White and pastel shaded garments made of delicate fabrics. [. . . ] ❉ max. ❉: 1) optional / Yes : dosing required For improved garment care, spin speed is restricted in these programmes. The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702 Whirlpool is a registered trademark of Whirlpool USA 5019 300 00196 - the sensor technology adapts water, energy and programme duration to the size of your wash load. CONSUMPTION DATA Temperature Programme Mixed Cotton Cotton Cotton Synthetics Synthetics Delicates Wool/Handwash White Light colours Dark EcoCotton* EcoCotton* EcoCotton* Aqua Eco Speed 15’ Jeans (°C) 40 95 60 40 60 40 40 40 40 40 40 60 60 40 40 30 40 (kg) 4. 0 7. 0 7. 0 7. 0 3. 0 3. 0 1. 5 1. 0 7. 0 4. 0 4. 0 7. 0 3. 5 3. 5 3. 0 3. 0 4. 0 (l) 48 74** 54 66 46** 42 60 45 68 60 40 54 42 42 19 25 52 (kWh) 0. 50 2. 20 1. 19 0. 75 0. 90 0. 50 0. 65 0. 55 0. 80 0. 45 0. 55 0. 91 0. 85 0. 60 0. 45 0. 15 0. 50 Load Water Energy Approx. Programme Duration (hours : minutes) without “Rapid” with “Rapid” 1:00 — 2:30 — 2:20 1:35 2:05 1:15 1:35 1:10 1:20 0:55 0:50 — 0:40 — 2:20 — 1:20 — 1:40 1:15 4:00 — 3:00*** — 2:30*** — 1:00 — 0:15 — 1:30 1:10 hours the programme shall be finished. Thus, it allows you to have your laundry ready at a particular time and to profit from more favourable energy rates during the night, for example. • The time until the “Cycle end” can be selected in full hour time segments (1 to 24 h). When you press the button, the shortest possible time will be displayed; keep on pressing the button to loop through all the available times. To remove it again, keep on pressing the button until you see the value “0:00”. • When you have selected the desired time until the “Cycle end”, press “Start/Pause” - the countdown will begin. • During the countdown, you can still modify the programme setting (select or deselect options, change spin speed etc. ). If the modifications prolong the programme duration so that it overruns the originally set time until the “Cycle end”, the programme will start immediately. * ** *** Reference programmes for Energy Label. To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. Automatic adaptation of programme duration after detection of wash load. DETERGENT DOSING RECOMMENDATION With the “Dosing Aid” button, you can make your washing machine indicate you the recommended detergent quantity for your wash load, depending on the soil level selected and the size of the load. • Helps to save detergent and protect the environment and also sensitive skin by avoiding detergent overdosing. • Before you use this function, you must adapt the washing machine to the dosing amounts which are recommended for the detergents you use. Also check if your region’s water hardness corresponds with the water hardness level “soft” of your washing machine - if not adapt it. • Select programme, options and cycle end BEFORE using the “Dosing Aid” button. For any details, refer to the separate “Dosing Aid” Instructions for Use. PROGRAMME END The “Door open” indicator lights up, and the display shows “End”. Turn the programme selector to the “Off/O” position. Leave the door ajar to allow the drum to dry. LOAD LAUNDRY, CLOSE DOOR AND SELECT PROGRAMME Load the laundry, close the door and turn the programme selector to the desired programme; the “Start/Pause” indicator blinks. The temperature and spin speed shown on the display can be altered by pressing the “Temperature” button or the “Spin” button . [. . . ] = lightly soiled = normally soiled = heavily soiled Not all soil levels are selectable for each programme. “Rinse Hold” ) • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If you select spin speed “0”, the final spinning is cancelled and the water is drained out only. [. . . ]