User manual WHIRLPOOL AWV 628/1 PROGRAM CHART

[. . . ] GB AWV 628/1 PROGRAMME TABLE Wool Programme Type of textiles/Degree of soiling Max. Load Detergent and Additives Prewash Wash Fabric Softener Special functions that can be selected Half No spin Rinse Load Hold 1/2 Stop Anti Carico Centrif. Piega Temperature Selector Programme selector knob kg Cotton with pre-wash Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc). [. . . ] The programme ends with a long spin cycle. This programme provides a long spin cycle, the same as the spin cycle in the Cotton programme. With this programme you can add fabric softener or starch. The programme ends with a short spin cycle. This programme provides a short spin cycle, the same as the spin cycle in the Wool programme. e. g to unload the laundry earlier. °C 1 4. 5 ❉ Yes ❉ ❉ ❉ ❉ Min. to 95 1 2 Cotton 4. 5 — Yes ❉ ❉ ❉ ❉ ❉ ❉ — ❉ ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ — ❉ ❉ ❉ ❉ No Min. to 95 2 3 4 5 6 A B C D Synthetic Cotton short Synthetic short Delicate Wool Rinse and long spin Long spin Rinse and short Spin Short Spin Draining 2. 0 2. 5 2. 0 1. 5 1. 0 4. 5 4. 5 1. 5 1. 5 — — — — — — — — — — Yes Yes Yes Yes — — — — — Min. — — 3 4 5 6 A B C D ❉ — — — — ❉ — ❉ — — ❉ — — ❉ — — GB CONSUMPTION DATA Water Programme (l) Cotton 95° C with pre-wash Cotton 95° C Cotton 60° C Synthetic 60° C Cotton short 40° C Synthetic 40° C Delicate 40° C Wool 40° C 1 2 2 3 4 5 6 80 70 70 60 65 60 80 80 (kWh) 2. 00 1. 80 1. 20 0. 90 0. 70 0. 60 0. 60 0. 60 Energy Programme duration (min) 120 110 110 85 75 75 70 65 PROGRAMME START 1. Press the “On/Off” button. DOOR LOCK The door locks automatically after the programme start until the end of the programme. PROGRAMME END SELECTING THE PROGRAMME 1. Turn the programme selector knob clockwise to the desired programme. Set the temperature knob to the desired temperature. • The programme sequence indicator is at “Stop”. Cancel the special options by pressing the appropriate buttons. [. . . ] Select the new programme, temperature and relative options. Press the “On/Off” button. NOTES AND INDICATIONS FOR USE Water level It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results. Cleaning the pump filter To ensure an impeccable function of the pump, check the filter regular and clean it if necessary. Close the filter properly to avoid leakage. Motor smell Washing machine motor creates a typical electrical smell during first cycles, this is normal and disappears after a few cycles. 5019 100 00106 [. . . ]