User manual WHIRLPOOL AWZ 250 INSTRUCTION FOR USE

[. . . ] Lit: Anti-Crease is running. * Test programmes according IEC 61121 Time 5019 307 00290 PREPARING THE LAUNDRY 1. Check that all fastenings are closed and that pockets are empty. Place laundry loosely in the drum to make sure it doesn’t become tangled. [. . . ] Sort laundry as follows: A) By care symbols (on the collar or inside seam): Suitable for tumble drying Tumble drying with reduced drying intensity only. Do not tumble dry B) By amount and thickness/weight Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e. g. C) By type of fabrics Cotton/linen: Towels, cotton jersey, bed and table linen made of cotton or linen. Synthetics/Easy Care: blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes. D) By drying level • Sort into: iron dry, cupboard dry, etc. Do not tumble dry: woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc. Important: only use specific indicated dryersafe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying. The dryer does not operate: (after a power failure and/or interruption to the mains supply, always press the Start/ Pause button). • Is the plug properly inserted into the mains electricity socket?• Has the Start/Pause button been pressed?Lint filter indicator lamp light on: • Is the lint filter clean?• Is the vent hose blocked? All programme sequence indicators blinking: AFTER-SALES SERVICE If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee). Please specify: • The nature of the fault. • The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open. • Your full address and phone number. CHANGING A PROGRAMME When changing the programme during the drying cycle, the dryer stops. [. . . ] • The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open. • Your full address and phone number. CHANGING A PROGRAMME When changing the programme during the drying cycle, the dryer stops. To operate the new programme, press the Start/Pause button. [. . . ]