User manual WHIRLPOOL AWZ 6943 PROGRAM CHART

[. . . ] Function is not active in time controlled programs and Airing . Anti-Crease Protection Synthetics - Synthetics Filter Airing Delicate Plus Water Container 30’ 20’ 1. 5 Specially indicated for very delicate garments. 1. 5 kg Overdry protection - - - Airing Laundry is aired and refreshed for 30 minutes without heating. Completes drying or dries single items (suitable for all fabrics). - PROGRAMME SEQUENCE INDICATORS Overdry Lit: Overdry protection is working Protection Drying Lit: programme is running. Anti-Crease Lit: Anti-Crease is running. Time * Test programmes according IEC 61121 5019 307 00315 PREPARING THE LAUNDRY 1. Check that all fastenings are closed and that pockets are empty. [. . . ] • Press the option button again to cancel the option. STARTING & COMPLETING A PROGRAMME 1. Having selected the desired programme and options, press the Start/Pause button. If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing. This Anti-Crease cycle can be extended up to 12h when Anti-Crease option has been selected. On completion of the programme, set the programme selector knob to position “0”. CHANGING A PROGRAMME When changing the programme during the drying cycle, the dryer stops. The Start/Pause indicator lamp is blinking “ “. To operate the new programme, press the Start/Pause button. INTERRUPTING A PROGRAMME To interrupt the dryer during operation 1. Set the programme selector knob to Airing “ “. Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door. To restart, after door opening, close the door and press the Start/Pause button again. DAILY MAINTENANCE & CLEANING Clean the lint filter at the end of every drying cycle: 1. Remove lint using a soft brush or your fingertips. Empty the water container at the end of every drying cycle. Pull the handle to remove the water container. [. . . ] Water droplets underneath the dryer: • Is the heat exchanger correctly positioned?• Has any fluff on the heat exchanger seal been wiped away?• Has any fluff on the door seal been wiped away?• Has the water container been positioned correctly? [. . . ]