User manual WHIRLPOOL AWZ 7914 AL INSTRUCTION FOR USE

[. . . ] When the Anti-Crease option is Anti-Crease selected and laundry has not been Protection taken out, an anti-crease cycle is activated for 12 hrs. If the option is selected with “Start Delay”, the cycle operates both before and after the dring cycle. The indicator lamp lights up when Filter the filter needs cleaning. Clean the filter at the end of every cycle. [. . . ] PROGRAMME SEQUENCE INDICATORS Drying Airing The programme sequence indicator lamps show the status or End Anti- the progress of the drying cycle. crease Gentle and Rapid cannot be selected together. Buzzer and Anti-crease cannot be selected together. * Test programmes according IEC 61121. 5019 100 18164 PREPARING THE LAUNDRY 1. Check that all fastenings are closed and that pockets are empty. Place laundry loosely in the drum to make sure it doesn’t become tangled. Sort laundry as follows: A) By care symbols (on the collar or inside seam): Suitable for tumble drying Tumble drying with reduced drying intensity only Do not tumble dry B) By amount and thickness/weight Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e. g. C) By type of fabrics Cotton/linen: Towels, cotton jersey, bed and table linen made of cotton or linen. Synthetics/Easy Care: Blouses, shirts, overalls, etc. • Is the plug properly inserted into the mains electricity socket?• Has the start delay option been selected?• Has the Start/Pause button been pressed?Lint filter indicator lamp light on: • Is the lint filter clean?• Is the vent hose blocked? AFTER-SALES SERVICE If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee). Please specify: • the nature of the fault. • the service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open. • your full address and phone number. • STARTING AND COMPLETING A PROGRAMME 1. Having selected the desired programme and options, press the Start button. [. . . ] Having selected the desired programme and options, press the Start button. If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing. On completion of the programme, set the programme selector knob to position “0”. [. . . ]