User manual WHIRLPOOL BLPE 6200 IN INSTRUCTION FOR USE

[. . . ] Note. : To view or change the previously set temperature, turn the knob !To return to the display of the remaining time, wait 20 seconds or press the button . To use the special functions Extra browning functions”. and Heat Maintenance , consult the chapter “Special Cooking time End of cooking time Clock Fast starting the oven When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “ ”. [. . . ] Note. : The set values can be changed even during cooking. At the end of cooking: Switch off the oven by turning knob  back to“0”. The time of day appears again on the display. Setting end of cooking time By using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Set the function and temperature or grill level. See chapter: “Fast starting the oven”, paragraph: “Select cooking function”. Example: it is 10 a. m: press button , the indicator blinks on the display and “- 0:00” appears. 3. 45 minutes) by turning the knob !: the set time appears on the display. Press the button to confirm setting selection (e. g. 45 minutes): the indicator blinks and the display indicates the time of day plus the cooking time (e. g. : time 10:00 + 45 minutes = ore 10:45). Select the time when you want cooking to end by turning the knob !until the time of day (10:00) appears, or wait about 20 seconds for 6. Repeatedly press the button the setting to be automatically accepted. The oven will turn on automatically at the end of cooking time minus cooking time (e. g. To verify the chosen temperature or grill level, turn knob !To verify or change both the cooking time (e. g. : 45 min. ) and the end of cooking time (e. g. : 12:39), press button. the Important notes: To cancel any selection, turn knob  to “0”. down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons. Keeping button Press button “ ” and again for 5 seconds to reactivate. For safety reasons, the oven switches off automatically (except for the functions) after 4. 5 hours of continuous operation. GB Special functions: (Extra browning Extra browning and Heat Maintenance ) Personalized cooking This function can be selected in order to personalize cooking results. This function is not available in combination with the . following functions: How to select the function: To enable the function, turn the function selector knob to the lamp symbol. [. . . ] to set the time you want the pyro-clean to finish. Press the button to confirm. Timer The minute minder can only be used when the oven is not in use, and allows a maximum setting of 3 hours and 59 minutes. Leave knob  on “0”. Press button , the symbol blinks on the display. Selecting the end of pyro-clean time with delayed start 3. [. . . ]