User manual WHIRLPOOL BMV 6201/IN PROGRAM CHART

[. . . ] BMV 6201 Benutzer- und Wartungshandbuch User and maintenance manual IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: The appliance must be disconnected from the power supply before carrying out any installation work. [. . . ] Food residues can be easily removed using a brush or sponge. Cleaning the rear wall and catalytic side panels of the oven (if present): IMPORTANT: do not use corrosive or abrasive detergents, coarse brushes, pot scourers or oven sprays which could damage the catalytic surface and ruin its self-cleaning properties. • Operate the oven empty with the fan-assisted function at 200°C for about one hour • Next, leave the appliance to cool down before removing any food residue with a sponge. GB14 MAINTENANCE WARNING Use safety gloves. Ensure the oven is cold before carrying out the following operations. Disconnect the oven from the power supply. REMOVING THE DOOR To remove the door: 1. Lift the catches and push them forwards as far as they will go (fig. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (fig. 2 Remove the side accessory holder grilles (Fig. Pull the heating element out a little (Fig. To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral supports. MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY) Fig. 5 GB15 REPLACING THE OVEN LAMP To replace the rear lamp (if present): 1. Disconnect the oven from the power supply. 6), replace the lamp (see note for lamp type) and screw the lamp cover back on. To replace the side lamp (if present): 1. Disconnect the oven from the power supply. Remove the side accessory holder grilles, if present (Fig. Use a screwdriver to prise off the lamp cover (Fig. Replace the lamp (see note for lamp type) (Fig. Reposition the lamp cover, pushing it on firmly until it snaps into place (Fig. Refit the side accessory holder grilles. Reconnect the oven to the power supply. Fig. 9 N. B. : Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C halogen lamps. 3. Function selector knob Thermostat knob Thermostat led HOW TO OPERATE THE OVEN • Turn the selector knob to the required function. [. . . ] To obtain best results, carefully follow the advice given in the cooking table for the choice of accessories (supplied) to be placed on the various shelves. Cooking different foods at the same time Using the“CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. Desserts Cook delicate desserts with the conventional function on one shelf only. Use dark coloured metal cake tins and always position them on the wire shelf supplied. To cook on more than one shelf, select the forced air function and stagger the position of the cake tins on the shelves, aiding optimum circulation of the hot air. [. . . ]