User manual WHIRLPOOL BUILT-IN TRIM KIT INSTALLATION

[. . . ] Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. [. . . ] Fasten supports to bottom duct floor with six ¹/" screws, as shown. Failure to follow these instructions can result in death, fire, or electrical shock. Fasten bottom bracket to bottom duct using two ¹/" screws. (Rear view of bottom duct) Install bottom duct with two ¹/" screws. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven. Unplug microwave oven before proceeding with installation. Remove any loose items inside microwave oven. NOTE: Remove any dirt or oil on microwave oven surface before ducts are attached. NOTE: Bottom bracket must be flat against cutout floor in order to correctly engage with anti-tip bracket. [. . . ] Make sure orientation is correct as stated in Step 2. Replace any loose items that have been removed from microwave oven cavity. Save this installation instruction for future reference. [. . . ]