User manual WHIRLPOOL CHIARA 1400 PROGRAM CHART

[. . . ] White and pastel shaded garments made of delicate fabrics. if necessary also stain removers or bleaches on oxygen basis. Normally to heavily soiled and robust white cotton laundry. Colours 40 °C 4. 0 Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, Black and dark garments made of cotton, cotton blends and polyester. detergent for dark garments with this programme. [. . . ] “Clean pump”: waste water is not pumped out. Spin speed on display blinks: unbalance during spinning. Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. *** Automatic adaptation of programme duration after detection of wash load. Power consumption: in off-mode 0. 11 W / in left-on mode 0. 11 W. SET CYCLE END With this function you can postpone your programme to complete at a later time: press the button to select in how many hours the programme shall be finished. Thus, it allows you to have your laundry ready at a particular time and to profit from more favourable energy rates during the night, for example. • The time until the “Cycle end” can be selected in full hour time segments (1 to 24 h). When you press the button, the shortest possible time will be displayed; keep on pressing the button to loop through all the available times. To remove it again, keep on pressing the button until you see the value “0:00”. • When you have selected the desired time until the “Cycle end”, press “Start/Pause” - the countdown will begin. • During the countdown, you can still modify the programme setting (select or deselect options, change spin speed etc. ). If the modifications prolong the programme duration so that it overruns the originally set time until the “Cycle end”, the programme will start immediately. • Sometimes the programme may finish before the selected time until the “Cycle end” has expired (e. g. [. . . ] • Recommendable for lightly soiled laundry without stains. • Make sure that your detergent is suitable for cold wash temperatures (15 or 20 °C). • Not selectable for Cotton 95 °C. “Intensive rinse” button • More water is added and rinse cycle is prolonged. [. . . ]