User manual WHIRLPOOL CKH 420 INSTRUCTION FOR USE

[. . . ] Packaging The packaging material is 100% recyclable and is marked with the recycling symbol to identify the type of material which must be taken to the local collection centres. d 2. Product The cooktop has been manufactured with recyclable material. Dispose of it following the local regulations for the disposal of waste. Before disposing of it make it unusable by cutting off the supply cable. 28 M 28 Y N C WARNINGS FOR THE USE OF ELECTRICAL APPLIANCES When using electrical appliances some important rules must always be followed. [. . . ] − As the cooking zone remains hot for some time after the cooktop is switched off, turn the zone off a few minutes before the end of cooking. The residual heat will complete the cooking. ADVICE FOR SAFE USE OF THE COOKTOP − Before switching on make sure that you have the correct knob for the hotplate chosen. It is advisable to put the pan on the hotplate before switching on and to take it away after switching off. − Use cookware with flat and even bottoms (be careful when using cast iron vessels). Uneven bottoms can scratch the glass ceramic surfaces. Be careful that the bottom is clean and dry. − Make sure that the handles of cookware do not stick out over the edge of the cooker, to avoid them being knocked over by accident. This also makes it more difficult for children to reach the cooking vessels. − Do not lean over the cooking zones when they are switched on. − Do not drop heavy or sharp objects on the glass ceramic cooktop. If the surface is broken or damaged unplug the cooktop and contact the aftersales service. − Do not put aluminium foil or plastic objects on the cooking zones when they are hot. − Remember that the cooking zones remain hot for some time after they are switched off (about 30 min. ). − Follow the cleaning instructions carefully. − If you note a crack in the cooktop, switch the appliance off immediately and call the After-Sales Service. Do not scratch the cooktop with cutting or sharp objects. Do not use the glass ceramic cooktop as a work surface. 30 M 30 Y N C CLEANING AND MAINTENANCE CLEANING THE GLASS CERAMIC COOKTOP Make sure that the cooktop is switched off before cleaning it. Remove any encrustation using a special scraper which can be bought. Detergents can be used, but they must not be abrasive or corrosive. Any remaining detergent must be completely removed with a damp cloth. Do not put any objects on the cooktop which can melt with heat, such as plastic objects, aluminium foil, sugar or sugar products. If any object melts on the cooktop, remove it immediately (while the cooktop is still hot) using a special scraper, to prevent any irreversible damage to the glass ceramic surface. [. . . ] − The plug must be put into a socket connected to the earth system in compliance with safety rules. − For the United Kingdom: As the colours of the wire of the supply cable of this appliance may not correspond with the colours which identify the terminals of your plug, proceed as follows: - the yellow/green wire must be connected to the plug terminal marked with the letter E or with the earth symbol or coloured green or yellow/green; - the blue wire must be connected to the terminal marked with the letter N or coloured black; - the brown wire must be connected to the terminal marked with the letter L or coloured red; − The connection can be made directly to the mains by putting an all-pole switch with minimum opening between the contacts of 3 mm between the appliance and the mains. − The supply cable must not touch hot parts and must be so positioned that it does not exceed the temperature of 75oC at any point. − When the appliance is installed the switch or socket must always be accessible. [. . . ]